topic Re: Any one using netburner mod-5282 carrier board mod-dev-100 in ColdFire/68K Microcontrollers and Processors https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Any-one-using-netburner-mod-5282-carrier-board-mod-dev-100/m-p/143655#M2713 <HTML><HEAD></HEAD><BODY><DIV>Hi Tama,</DIV><DIV>&nbsp;</DIV><DIV>I have used that board, but don't know about those test ports. However, NetBurner publish some apps notes on how to tuse the GPIO on the board at their website <A href="http://www.netburner.com" rel="nofollow" target="_blank">www.netburner.com</A>. Please check with those guys, and report back the results on this forum.</DIV><DIV>&nbsp;</DIV><DIV>Bye for now,</DIV><DIV>&nbsp;</DIV><DIV>Marcia</DIV></BODY></HTML> Tue, 04 Sep 2007 03:26:24 GMT Marcia 2007-09-04T03:26:24Z Any one using netburner mod-5282 carrier board mod-dev-100 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Any-one-using-netburner-mod-5282-carrier-board-mod-dev-100/m-p/143654#M2712 <HTML><HEAD></HEAD><BODY><SPAN>Hi Guys</SPAN><BR /><SPAN>I am using NETBURNER MOD-DEV-100 carrier board with mod5282 core module for our project. I want to know how to access the test ports connected to pin IO47-IO72 of xilinx xc9572xltq100 on the board. There are some functions to write to LED, Display and read the dip sw. Where can I find the address mapping of these ports and the test ports in order to use them.</SPAN><BR /><BR /><SPAN>Can any one pls let me know about it.</SPAN><BR /><BR /><SPAN>Thanks a lot.</SPAN><BR /><SPAN>tama</SPAN><BR /><BR /><BR /><DIV> </DIV></BODY></HTML> Fri, 24 Aug 2007 09:05:00 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Any-one-using-netburner-mod-5282-carrier-board-mod-dev-100/m-p/143654#M2712 tama 2007-08-24T09:05:00Z Re: Any one using netburner mod-5282 carrier board mod-dev-100 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Any-one-using-netburner-mod-5282-carrier-board-mod-dev-100/m-p/143655#M2713 <HTML><HEAD></HEAD><BODY><DIV>Hi Tama,</DIV><DIV>&nbsp;</DIV><DIV>I have used that board, but don't know about those test ports. However, NetBurner publish some apps notes on how to tuse the GPIO on the board at their website <A href="http://www.netburner.com" rel="nofollow" target="_blank">www.netburner.com</A>. Please check with those guys, and report back the results on this forum.</DIV><DIV>&nbsp;</DIV><DIV>Bye for now,</DIV><DIV>&nbsp;</DIV><DIV>Marcia</DIV></BODY></HTML> Tue, 04 Sep 2007 03:26:24 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/Any-one-using-netburner-mod-5282-carrier-board-mod-dev-100/m-p/143655#M2713 Marcia 2007-09-04T03:26:24Z