topic Re: MCF5485 - ethernet-getting started in ColdFire/68K Microcontrollers and Processors https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5485-ethernet-getting-started/m-p/141710#M2441 <HTML><HEAD></HEAD><BODY><DIV></DIV>astrix,<BR /><BR />We could use a little more info inorder to help on this.<BR /><BR />If you use the linux BSP you get TCP/IP and UDP.<BR /><BR />Also, make sure you download the MicroCode for the DMA engine.<BR />The ethernet ports need you to use the DMA engine and there are special<BR />functions in the API (microcode) for the ethernet.<BR /><BR />-JWW<BR /></BODY></HTML> Fri, 17 Aug 2007 20:30:45 GMT JWW 2007-08-17T20:30:45Z MCF5485 - ethernet-getting started https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5485-ethernet-getting-started/m-p/141709#M2440 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV> </DIV><DIV>how to implement ethernet interface on MCF 5485?</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;I need peer to peer comm.</DIV><DIV>&nbsp;</DIV><DIV>TCP/IP and UDP protocols.</DIV><DIV>&nbsp;</DIV><DIV>how do i initialise a socket?</DIV><DIV>&nbsp;</DIV><DIV>what is the local port no for SCADA (i dont use MODBUS)</DIV><DIV>&nbsp;</DIV><DIV>is RTOS necessary to have a network interface???</DIV><DIV>&nbsp;</DIV><DIV>pl guide me to any document relating to the s/w implementation</DIV><DIV>&nbsp;</DIV><DIV>is it possible to start and test the TCP/IP s/w with device evaluation board.</DIV><DIV>&nbsp;</DIV><DIV>thanx</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><BR /><BR /><SPAN>Message Edited by astrix on </SPAN><SPAN class="date_text">2007-07-31</SPAN><SPAN> </SPAN><SPAN class="time_text">11:04 AM<BR /><SPAN>--<BR />Alban Edit: FSL Part Number must figure in Message Subject line.</SPAN><BR /></SPAN><BR /><BR /><SPAN>Message Edited by Alban on </SPAN><SPAN class="date_text">2007-08-01</SPAN><SPAN> </SPAN><SPAN class="time_text">09:35 PM</SPAN></BODY></HTML> Tue, 31 Jul 2007 16:59:13 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5485-ethernet-getting-started/m-p/141709#M2440 astrix 2007-07-31T16:59:13Z Re: MCF5485 - ethernet-getting started https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5485-ethernet-getting-started/m-p/141710#M2441 <HTML><HEAD></HEAD><BODY><DIV></DIV>astrix,<BR /><BR />We could use a little more info inorder to help on this.<BR /><BR />If you use the linux BSP you get TCP/IP and UDP.<BR /><BR />Also, make sure you download the MicroCode for the DMA engine.<BR />The ethernet ports need you to use the DMA engine and there are special<BR />functions in the API (microcode) for the ethernet.<BR /><BR />-JWW<BR /></BODY></HTML> Fri, 17 Aug 2007 20:30:45 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5485-ethernet-getting-started/m-p/141710#M2441 JWW 2007-08-17T20:30:45Z