ColdFire/68K Microcontrollers and ProcessorsのトピックRe: M52233DEMO Free (open source) need help

M52233DEMO Free (open source) need help

digit — Wed, 22 Nov 2006 01:44:23 GMT

I'm looking for free (open-source) IDE, toolchain for M52233DEMO board. M52233DEMO board include MCF52233 + P&E Micro USB BDM on a single board.

I have some success building .elf with CodeSourcery toolchain and loading/debugging in RAM with GDB + P&E Micro stub.

Is it possible to load in flash using CodeSourcery GDB ? For now I use CFFlasher to load in flash, the problem is that I can't find how to use CFFlasher from makefile (command line), it look like a freaking non scriptable GUI apps (I'm I wrong ?).

Re: M52233DEMO Free (open source) need help

oed — Wed, 22 Nov 2006 19:06:24 GMT

Try from cmd:

cfflasher -t M52233EVB -p exampe.elf -s -bdm PE_USB_ML

I don't know how to change de USB speed, for this reason I can't used the cfflash , howerer you don't need change USB speed and this command it's ok.

Re: M52233DEMO Free (open source) need help

digit — Tue, 28 Nov 2006 00:55:38 GMT

No luck with cfflasher CLI interface...

Can't find email contact anywhere is cfflasher for bug report.

If someone here have contact @ freescale please forward attached Bug report

CFFlasher3.1.2_bug.pdf

Message Edited by t.dowe on 2009-09-02 05:04 PM

Re: M52233DEMO Free (open source) need help

J2MEJediMaster — Wed, 29 Nov 2006 00:23:43 GMT

Go to the support section of this Web site (use the Support link at the top of this page), then follow the Request help (online) link to submit a SR (service request) on this.

---Tom

Re: M52233DEMO Free (open source) need help

digit — Wed, 29 Nov 2006 01:20:16 GMT

That is for sure a great tool

How do I submit bug report on bug report system ?

Code:

Unexpected Error We are unable to process your Service Request because of an Unexpected error. Please go back and try again. Please accept our apologies for any inconvenience this may cause. In case of any difficulty, you may access Freescale's Customer Support at one of the following numbers:    Americas: 1-800-521-6274 6AM-5PM Mountain Standard Time   Asia: +852-2666-8307 8AM-6PM Hong Kong   Japan: 0120-191-014 8AM-5PM Tokyo   Europe: +49-89-92103-559 9AM-5PM Munich    Or you can contact us by email at support@freescale.com   Regards,Freescale Semiconductor Customer Support

Message Edited by digit on 2006-11-2805:21 PM

Re: M52233DEMO Free (open source) need help

J2MEJediMaster — Thu, 30 Nov 2006 04:55:34 GMT

Well, it shouldn't doing that.

I have forwarded your problem manually.

I apologize for the trouble.

---Tom

Re: M52233DEMO Free (open source) need help

Zorrillo — Thu, 30 Nov 2006 07:08:35 GMT

There is indeed a bug on CF flasher, however, you still need to open a Service Request. You can do it mailing to support@freescale.com in case the web is still failing, otherwise will be hard to provide status of the problem.

Re: M52233DEMO Free (open source) need help

digit — Tue, 12 Dec 2006 01:11:22 GMT

From freescale:

Code:

we would not be able to accommodate your requested change.We have verified that the CLI does not fully function. There are noplans at this time to correct this. You will have to use the GUI, orpurchase a tools for your needs. (P&E makes a CLI for ColdFire)

Re: M52233DEMO Free (open source) need help

RuiFaria — Thu, 19 Apr 2012 23:24:12 GMT

hi digit,

I am having the same problem than you, i can't program my M52259 by command-line but it is okay using GUI.

Did you find a solution for your problem? which was the solution?

Thanks.

Best regards,

Rui Faria