ColdFire/68K Microcontrollers and Processors中的主题 Re: MCF5282 boot from internal flash. https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5282-boot-from-internal-flash/m-p/136868#M1858 <HTML><HEAD></HEAD><BODY><DIV>First, make sure that your project has all the necessary initialization code in it (meaning you aren't relying on dBUG to initialize the system).&nbsp; Then, link your project to start at the base of the boot flash and use a flash programmer to program your image onto the EVB.&nbsp; You might want to have a backup of the dBUG image in case something goes wrong <IMG alt=":smileyhappy:" class="emoticon emoticon-smileyhappy" id="smileyhappy" src="http://freescale.i.lithium.com/i/smilies/16x16_smiley-happy.gif" title="Smiley Happy" /></DIV><DIV>&nbsp;</DIV><DIV>-MN</DIV></BODY></HTML> Wed, 31 May 2006 04:58:40 GMT mnorman 2006-05-31T04:58:40Z MCF5282 boot from internal flash. https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5282-boot-from-internal-flash/m-p/136867#M1857 <HTML><HEAD></HEAD><BODY><SPAN>Hello,</SPAN><BR /><SPAN>I am new to this forum and the ColdFire microcontrollers.</SPAN><BR /><SPAN>I am working with M5282LITE evaluation board.</SPAN><BR /><SPAN>With the GNU tools and Open TCP I have made a project which responds to ping from the internet.</SPAN><BR /><SPAN>When I use m68k-bdm-elf-gdb to upload the project and run it everything works.</SPAN><BR /><SPAN>How can I make the project boot from internal flash memory without needing to use dBUG first. I would like the program to start after reset.</SPAN><BR /><SPAN>Tell me if you need more information.</SPAN><BR /><BR /><BR /><SPAN>Thanks,</SPAN><BR /><SPAN>Rusi Gerogiev</SPAN></BODY></HTML> Tue, 23 May 2006 21:45:53 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5282-boot-from-internal-flash/m-p/136867#M1857 TheMan 2006-05-23T21:45:53Z Re: MCF5282 boot from internal flash. https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5282-boot-from-internal-flash/m-p/136868#M1858 <HTML><HEAD></HEAD><BODY><DIV>First, make sure that your project has all the necessary initialization code in it (meaning you aren't relying on dBUG to initialize the system).&nbsp; Then, link your project to start at the base of the boot flash and use a flash programmer to program your image onto the EVB.&nbsp; You might want to have a backup of the dBUG image in case something goes wrong <IMG alt=":smileyhappy:" class="emoticon emoticon-smileyhappy" id="smileyhappy" src="http://freescale.i.lithium.com/i/smilies/16x16_smiley-happy.gif" title="Smiley Happy" /></DIV><DIV>&nbsp;</DIV><DIV>-MN</DIV></BODY></HTML> Wed, 31 May 2006 04:58:40 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/MCF5282-boot-from-internal-flash/m-p/136868#M1858 mnorman 2006-05-31T04:58:40Z