ColdFire/68K Microcontrollers and ProcessorsのトピックRe: compiler options https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/compiler-options/m-p/134845#M1507 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>It depends if you are starting the compiler from the IDE or from batch (in a batch file or make file).</DIV><DIV>&nbsp;</DIV><DIV>If you are building from batch you can add the options on the command line.</DIV><DIV>If you are building from the IDE, you have to open the target settings&nbsp;dialog (Using ALT+F7) and&nbsp;use the panels there to set the options.</DIV><DIV>&nbsp;</DIV><DIV>I hope this helps.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 05 May 2006 18:11:01 GMT CrasyCat 2006-05-05T18:11:01Z compiler options https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/compiler-options/m-p/134844#M1506 <HTML><HEAD></HEAD><BODY><DIV> </DIV><DIV>HAI,</DIV><DIV>&nbsp;&nbsp;Where we have to spcify the compiler options.</DIV><DIV>I am using evolution version of Codewarrior v6.2.</DIV><DIV>Please guide me.</DIV><DIV>Thank you.</DIV><DIV>&nbsp;</DIV></BODY></HTML> Fri, 05 May 2006 15:45:09 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/compiler-options/m-p/134844#M1506 rao 2006-05-05T15:45:09Z Re: compiler options https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/compiler-options/m-p/134845#M1507 <HTML><HEAD></HEAD><BODY><DIV>Hello</DIV><DIV>It depends if you are starting the compiler from the IDE or from batch (in a batch file or make file).</DIV><DIV>&nbsp;</DIV><DIV>If you are building from batch you can add the options on the command line.</DIV><DIV>If you are building from the IDE, you have to open the target settings&nbsp;dialog (Using ALT+F7) and&nbsp;use the panels there to set the options.</DIV><DIV>&nbsp;</DIV><DIV>I hope this helps.</DIV><DIV>&nbsp;</DIV><DIV>CrasyCat</DIV></BODY></HTML> Fri, 05 May 2006 18:11:01 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/compiler-options/m-p/134845#M1507 CrasyCat 2006-05-05T18:11:01Z