topic Re: MCIMX6U7CVM08AC U-Boot Error in ColdFire/68K Microcontrollers and Processors

MCIMX6U7CVM08AC U-Boot Error

RNidhin — Mon, 06 Jun 2022 08:54:14 GMT

This is regarding the CPU MCIMX6U7CVM08AC in which customer is facing U-boot error .However we have come across the PCN for this part . So do you mean to say that there is change in software or updated software will support this CPU

U-boot	2014.04 V9-g33e4134f
Flash	Macronix MX25L6405D

Please support with your answer

Re: MCIMX6U7CVM08AC U-Boot Error

TomE — Tue, 07 Jun 2022 03:49:43 GMT

That is an i.MX6 part.

This is a Coldfire forum.

Please move your post to a more appropriate one. There should be a "move" option on the page somewhere.

Tom

Re: MCIMX6U7CVM08AC U-Boot Error

RNidhin — Tue, 07 Jun 2022 08:03:07 GMT

Hi ,

Am unable to move this post. could you help me in moving to right forum

Re: MCIMX6U7CVM08AC U-Boot Error

TomE — Wed, 08 Jun 2022 07:09:33 GMT

I can't do that. I'm a lowly user and not an admin.

There's a Forum Article for this though. There's one "answer" there that doesn't make any sense, and another one that says "you could do this on the previous version of this site, but not on this one". Good luck.

https://community.nxp.com/t5/Using-Our-Community/how-to-delete-or-move-a-question/m-p/1150704#M502

Here's some more for you to look at:

https://community.nxp.com/t5/Using-Our-Community/Move-question-to-more-appropriate-forum/m-p/1279021

https://community.nxp.com/t5/Using-Our-Community/How-to-move-a-discussion-document/m-p/359902

Tom

Re: MCIMX6U7CVM08AC U-Boot Error

RNidhin — Wed, 08 Jun 2022 07:25:38 GMT

can you suggest me in which forum i can raise this questionaries