topic Re: ebook "Designing Embedded Applications with ColdFire" in ColdFire/68K Microcontrollers and Processors

ebook "Designing Embedded Applications with ColdFire"

wkurzbauer — Tue, 23 Apr 2019 12:58:34 GMT

Hello,

Can someone tell me where or how I can get a copy of the ebook "Designing Embedded Applications with ColdFire"

for stritcly private use.

Thank you very much

Werner

Re: ebook "Designing Embedded Applications with ColdFire"

Hui_Ma — Wed, 24 Apr 2019 05:10:01 GMT

Hi,

I don't have that ebook.

I would recommend below books for ColdFire application:

Thanks for the attention.

Have a great day,
Mike

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: ebook "Designing Embedded Applications with ColdFire"

TomE — Wed, 24 Apr 2019 07:38:38 GMT

That was here back in 2013, but now gives "The item does not exist. It may have been deleted."

ebook - Designing Embedded Applications with ColdFire

HuiMa, could you please ask around and find where this document published by NXP has got to? It should still be on the servers somewhere, it just didn't survive a "website reorganisation".

I tried "archive.org", but it hasn't been able to archive these pages.

Tom

Re: ebook "Designing Embedded Applications with ColdFire"

Hui_Ma — Wed, 24 Apr 2019 07:55:20 GMT

Hi Tom,

I also searched that NXP document, while I am quite suspect that ebook was Freescale official released.

The NXP document author johnmc , whose account is deactivated now.

I couldn't find any info about this ebook within internal resource.

Sorry for that.

best regards,

Mike

Re: ebook "Designing Embedded Applications with ColdFire"

wkurzbauer — Thu, 25 Apr 2019 11:25:28 GMT

Hi,

Thank you guys for your effort!

Maybe someone kept a copy and reads this post...

cheers

Werner