ColdFire/68K Microcontrollers and ProcessorsのトピックRe: MCF51JM Drivers

MCF51JM Drivers

a_sangros — Fri, 15 Mar 2019 08:42:13 GMT

Hi!

Using this micro in Windows 7 and 8 it's not possible to be recognized. Under Windows 10 is okey. I haven't found drivers for Windows 7 and 8. I need your help.

Thanks in advance.

Re: MCF51JM Drivers

Hui_Ma — Mon, 18 Mar 2019 02:43:53 GMT

Hi,

I think you are using MCF51JM for USB device application.

Please check if this issue also happened at [Flexis JM Demonstration Board].

Please check MCF51JM USB circuit design and USB communication signal quality.

Thank you for the attention.

Have a great day,
Mike

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: MCF51JM Drivers

a_sangros — Tue, 19 Mar 2019 08:44:01 GMT

Hi, @Hui_Ma

Thanks for your answer. I've written an inf file to link the sys file of the driver and it works! Solved in w7 64 bits. I'll test it in other versions.

Best regards,

Arturo

Re: MCF51JM Drivers

Hui_Ma — Wed, 20 Mar 2019 01:45:06 GMT

Hi Arturo,

Nice to hear the issue had been resolved. Thanks for the info.

best regards,

Mike