ColdFire/68K Microcontrollers and ProcessorsのトピックRe: mcf52235 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/mcf52235/m-p/656468#M13178 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Please make reference from attached picture on the minimum BDM signals. Hope it is helpful.</P></BODY></HTML> Mon, 31 Oct 2016 07:51:09 GMT miduo 2016-10-31T07:51:09Z mcf52235 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/mcf52235/m-p/656467#M13177 <HTML><HEAD></HEAD><BODY><P>I am currently designing a new circuit board with the MCF52235 device.&nbsp; And, I ran out of board real estate to fit in a full 26-pin connector to support both debugging and programming/flashing the microcontroller.&nbsp; What&nbsp;are&nbsp;the minimum&nbsp;signals/pins that I need to implement to support both debugging and programming/flashing functions.&nbsp;Are BDM port signal pin 1 to 10 out of the 26-pin connector&nbsp;all I needed?&nbsp;I can not find a sure/confident answer to support that&nbsp;from&nbsp;my researched resources/documents online.</P><P>Thanks!</P><P>Michael&nbsp;</P></BODY></HTML> Tue, 27 Sep 2016 18:18:18 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/mcf52235/m-p/656467#M13177 michaelkwan 2016-09-27T18:18:18Z Re: mcf52235 https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/mcf52235/m-p/656468#M13178 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Please make reference from attached picture on the minimum BDM signals. Hope it is helpful.</P></BODY></HTML> Mon, 31 Oct 2016 07:51:09 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/mcf52235/m-p/656468#M13178 miduo 2016-10-31T07:51:09Z