Linker error undefined "sinit" when converting project from CW 6.3 to 7.2

rbraisted — Thu, 02 May 2013 14:45:07 GMT

I'm trying to migrate to a newer version of the CodeWarrior compiler for ColdFire processors. I had a project that successfully built and linked in the old version. (the good ole days), but fails with the newer version. I saw some messages related to removing obsolete libs during the conversion that i suspect might be related to the problem. Here are some more details:

old => CodeWarrior® Development Studio for ColdFire Architectures Version 6.3, Build 14

IDE Version: 5.7.0 Build 2015

new => CodeWarrior Development Studio for ColdFire Architectures Version 7.2, Build 91218.

IDE Version: 5.9.0 Build 5293

when you open the existing .mcp file, CodeWarrior automatically converts to the newer version because of differences in preference panel data between the versions among other things. When i try to build this same project after the auto-conversion happens i get the following linker error.

Link Error : Undefined : "__sinit__"

Referenced from "__call_static_initializers" in

Re: Linker error undefined "sinit" when converting project from CW 6.3 to 7.2

cristina_c — Fri, 24 Jan 2014 10:20:08 GMT

Hi Rober,

I am having a kind of similar problem. How did you fix it?

Thanks!

ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Linker error undefined "__sinit__" when converting project from CW 6.3 to 7.2

Linker error undefined "__sinit__" when converting project from CW 6.3 to 7.2

Re: Linker error undefined "__sinit__" when converting project from CW 6.3 to 7.2

ColdFire/68K Microcontrollers and ProcessorsのトピックRe: Linker error undefined "sinit" when converting project from CW 6.3 to 7.2

Linker error undefined "sinit" when converting project from CW 6.3 to 7.2

Re: Linker error undefined "sinit" when converting project from CW 6.3 to 7.2