ColdFire/68K Microcontrollers and ProcessorsのトピックRe: How enable TELNET server in CF Lite code? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/How-enable-TELNET-server-in-CF-Lite-code/m-p/219387#M11145 <HTML><HEAD></HEAD><BODY>I don't know much about ColdFire Lite, but I do know that 'telnet' is little more than a TCP session with text flowing in both directions. Telnet clients normally provide terminal emulation, but you probably don't need that. So if ColdFire Lite (like any TCP/IP stack) provides means to accept TCP connections and send/receive data through them, then you are fully equipped to make a 'telnet server.' Listen for connections, receive text commands, interpret them, send responses. It's up to you.</BODY></HTML> Sun, 04 Oct 2009 15:54:53 GMT scifi 2009-10-04T15:54:53Z How enable TELNET server in CF Lite code? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/How-enable-TELNET-server-in-CF-Lite-code/m-p/219386#M11144 <HTML><HEAD></HEAD><BODY><P>I can see TELNET_SVR debug switch in CF Lite code (I couldn't find where that switch was enabled), how to enable TELNET Server any idea?.</P><P>&nbsp;</P><P>Thanks in advance.</P></BODY></HTML> Sun, 04 Oct 2009 09:40:43 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/How-enable-TELNET-server-in-CF-Lite-code/m-p/219386#M11144 TVNAIDU 2009-10-04T09:40:43Z Re: How enable TELNET server in CF Lite code? https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/How-enable-TELNET-server-in-CF-Lite-code/m-p/219387#M11145 <HTML><HEAD></HEAD><BODY>I don't know much about ColdFire Lite, but I do know that 'telnet' is little more than a TCP session with text flowing in both directions. Telnet clients normally provide terminal emulation, but you probably don't need that. So if ColdFire Lite (like any TCP/IP stack) provides means to accept TCP connections and send/receive data through them, then you are fully equipped to make a 'telnet server.' Listen for connections, receive text commands, interpret them, send responses. It's up to you.</BODY></HTML> Sun, 04 Oct 2009 15:54:53 GMT https://community.nxp.com/t5/ColdFire-68K-Microcontrollers/How-enable-TELNET-server-in-CF-Lite-code/m-p/219387#M11145 scifi 2009-10-04T15:54:53Z