CodeWarrior for ColdFire v6.3 : Debugger fault.

kolett999 — Mon, 15 Oct 2012 14:36:44 GMT

The Development Environment is CodeWarrior for ColdFire v6.3 , I have the following problem:

The instructions of the kind indicated in red, causes the Debugger blocking with the following error message:

Exception vector name: Address ERROR.

Do you have any idea what it could be, does anybody help me, please ?

Linker cmd:

…………………………

………………………

int_sram_vector (RWX) : ORIGIN = 0x20000000, LENGTH = 0x00000500

.int_sram_vector : {} > int_sram_vector

___INT_SRAM_VECTOR = ADDR(.int_sram_vector);

__INT_SRAM_VECTOR = ___INT_SRAM_VECTOR:

………………………..

……………………….

Source:

…………….

uint32 *pVect;

…………………

……………….

pVect = (uint32 *)__INT_SRAM_VECTOR;

………………….

………………..

thanks in advance for any suggestions.

Stefano

Re: CodeWarrior for ColdFire v6.3 : Debugger fault.

DavidS — Wed, 27 Feb 2013 15:54:08 GMT

Hi Stephen,

Did you resolve this?

I do not have the old CW6.3 and tested it with CW10.3 successfully.

I'd suggest setting a breakpoint on pVect and step the assembly code to see what it is being loaded with.

Regards,

David