JM Badge Board Applications - small mistake

AndreiBoeru — Sat, 27 Dec 2008 09:00:07 GMT

I found a little mistake in the demo Applications. In the file accelerometer.c starting from line 486, the original code is:
switch(sensitivity)
{
    case Range15g:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 0;
      break;
    case Range2g:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 1;
      break;
    case Range4g:
      PTCD_PTCD4 = 1;
      PTCD_PTCD5 = 0;
      break;
    case Range6g:
      PTCD_PTCD4 = 1;
      PTCD_PTCD5 = 1;
      break;
    default:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 0;
      break;
}
The problem is that Range2g and Range4g are misplaced. So the correct code would be
switch(sensitivity)
{
    case Range15g:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 0;
      break;
    case Range4g:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 1;
      break;
    case Range2g:
      PTCD_PTCD4 = 1;
      PTCD_PTCD5 = 0;
      break;
    case Range6g:
      PTCD_PTCD4 = 1;
      PTCD_PTCD5 = 1;
      break;
    default:
      PTCD_PTCD4 = 0;
      PTCD_PTCD5 = 0;
      break;
}
Happy coding!

Message Edited by Andrei Boeru on 2008-12-27 01:00 AM

Re: JM Badge Board Applications - small mistake

anthony_huereca — Wed, 07 Jan 2009 07:16:25 GMT

Thanks for catching that! The change will be uploaded to the website soon.

ColdFire/68K Microcontrollers and ProcessorsのトピックRe: JM Badge Board Applications - small mistake

JM Badge Board Applications - small mistake

Re: JM Badge Board Applications - small mistake