topic Re: 100% Newbie wanting to program HCS08 in OSBDM and TBDML

100% Newbie wanting to program HCS08

compuboy — Sat, 25 Aug 2007 12:43:31 GMT

Hello !

I am a Total Newbie to HCS08.
I am having some Samples of HCS08 based MC13213 SIP.
I want to program them and i am in search of the cheapest available solution for programmer,
it can even be RS232.

I tried finding any guide or so which could help me to develop a working BDM Interface.
Please help !

Thanks and Regards,
Shantur

Re: 100% Newbie wanting to program HCS08

peg — Sat, 25 Aug 2007 15:21:12 GMT

Hello Shantur,

You are in the right place, this forum is all about the cheapest BDM programmer/interface for the S08.

All the details are here for you to make your own or they are available already built up.

Re: 100% Newbie wanting to program HCS08

Witztronics — Tue, 28 Aug 2007 00:47:52 GMT

Shantur,

The OSBDM08 was created by the great folks who take part in this forum. It is the least expensive way to start programming and debugging with the S08 family of parts.

By searching this forum you can find the project files needed to build the OSBDM08 yourself, or low cost complete BDMs for sale.

This thread has a table listing some of the version of OSBDM being supported:

http://forums.freescale.com/freescale/board/message?board.id=OSBDM08&thread.id=212

We have built our own version of the OSBDM, that you can find on our web site.

http://www.witztronics.com

Witztronics