How to Check Installation of USBDM in Codewarrior 10

pgo — Fri, 13 May 2016 03:00:17 GMT

The process to check the installation of USBDM in Codewarrior 10.x

Assumes the following:

Codewarrior 10.6 installed
Current version of USBDM installed (from USBDM - Browse /Version 4.12.1/Software at SourceForge.net)
Current version of USBDM drivers installed (from USBDM - Browse /Version 4.12.1/Drivers at SourceForge.net)

Procedure:

In Codewarrior open the Help->About Codewarrior Development Studio

This should produce a dialogue similar to:

Select the COG icon (as outlined in red above).

This should open a dialogue with details about the USBDM plugin.

Confirm that the version agrees with what you expect.

If the above appears then the USBDM plugins has been installed.

To check further each component may be checked by click on the button indicated.

The above dialogue shows the expected plugins that make up USBDM.

If the above is not found then it is suggested that you uninstall and re-install USBDM. It may be necessary to do this if you upgrade the components of Codewarrior.

When re-installing make sure that the Codewarrior installation is correctly detected.

bye

Re: How to Check Installation of USBDM in Codewarrior 10

w_tension — Wed, 31 Aug 2016 07:57:05 GMT

How can we use USBDM in CodeWarrior 10.7?

Re: How to Check Installation of USBDM in Codewarrior 10

w_tension — Mon, 05 Sep 2016 06:57:12 GMT

Fixed in lastest release.

OSBDM and TBDMLのトピックRe: How to Check Installation of USBDM in Codewarrior 10

How to Check Installation of USBDM in Codewarrior 10

Re: How to Check Installation of USBDM in Codewarrior 10

Re: How to Check Installation of USBDM in Codewarrior 10