OSBDM and TBDMLのトピックRe: USBDM has problem when program MC9S08PT32

USBDM has problem when program MC9S08PT32

wangbaode — Fri, 19 Jul 2013 06:25:21 GMT

Hi pgo,

USBDM has problem when I program MC9S08PT32.

first,USBDM can detect chip ID,but can't find chip type.

so,I modify the hcs08_device.xml.and it can find chip type.

so, I program the chip,but another question comes out.

Is it OK to use USBDM to debug MC9S08PTxx?

Re: USBDM has problem when program MC9S08PT32

pgo — Sun, 21 Jul 2013 00:38:33 GMT

Hi Wang,

I don't have a PT32 to test with. I tried a PT60 and USBDM had no problems programming my test file. There isn't much difference between the PT32 & PT60 chips and I have checked the device description in the XML file. I can't suggest any reason for the problem. I suggest you have another look at the PT32 entry in the XML and see if you can spot any errors (apart from the missing ID #).

Could you try the following:

Restore the XML file to the original form
Start the programmer
Manually choose the PT32 chip from the menu. Don't use the autodetect as I didn't know the chip ID when adding the PT32 entry.
Try programming.

Let me know the error message produced.

bye

Re: USBDM has problem when program MC9S08PT32

wangbaode — Mon, 22 Jul 2013 04:17:15 GMT

Hi pgo,

I try again and again according to your suggestion. and result is failed.

I don't know your BDM version.But my BDM version information is as follow:

BDM hardware : USBDM_SWD_SER_JS16CWJ_V2.0

BDM firmware :V4.10.4

USBDM version:V4.10.5

and my test chip is M9S8PT32VLD