OSBDM and TBDMLのトピックRe: first steps- OSBDMJB16

first steps- OSBDMJB16

novi — Sun, 11 Mar 2012 17:13:54 GMT

Hi all,

I need a some help.

I am using USBDM JB16 -- http://www.wayengineer.com/index.php?main_page=product_info&products_id=289

USBDMJB16 not responding.

I purchased this debugger for an HCS08 based microcontroller project. I was planning on using an Windows XP SP2 system and CodeWarrior 6.3 for MCU ,BDM firmware v2.0 or v4.5

This is my first attempt to use HCS08 back ground debug my experience is with HC08.

Am I missing something?

does the flash program .s19 in the my new USBDM JB16 mikrokontroler ?

Any help would be appreciated.

Thank you

regards

Re: first steps- OSBDMJB16

Mickey — Sun, 11 Mar 2012 22:20:38 GMT

The first must go first, "http://www.wayengineer.com" If they do not have a good after-sales service, and that cheap is useless.

Re: first steps- OSBDMJB16

novi — Mon, 12 Mar 2012 02:21:30 GMT

Mickey:

When I buy OSBDM with processor HC908JB16, is it empy and I have to firmware or it has software?

How I can check it has firmware?

Re: first steps- OSBDMJB16

pgo — Mon, 12 Mar 2012 03:35:52 GMT

Dear Novi,

The JB16 version of USBDM is really obsolete.

However, you can still try the current firmware etc with it.

I suggest you download the USBDM software and install it. You will also need to update the firmware.

Documentation:

http://usbdm.sourceforge.net/

Software/Drivers/Firmware:

http://sourceforge.net/projects/usbdm/files/Version%204.9/

Good luck!

bye

Re: first steps- OSBDMJB16

novi — Tue, 13 Mar 2012 02:46:37 GMT

ok,

Tnx

regards