BeeKit Export and Import into CodeWarrior

ChrisRodgers — Mon, 20 Feb 2012 23:11:07 GMT

I'm trying to work through the BeeKit example from BKWCTKUG.pdf from the following lnk:

http://cache.freescale.com/files/rf_if/doc/user_guide/BKWCTKUG.pdf?fsrch=1&sr=1

I'm using BeeKit 2 and CodeWarrior 10.2 (Special Edition) from the following link:

http://cache.freescale.com/lgfiles/devsuites/MCU/CW_MCU_v10.2_SE.exe?WT_TYPE=IDE%20-%20Debug,%20Compile%20and%20Build%20Tools&WT_VENDOR=FREESCALE&WT_FILE_FORMAT=exe&WT_ASSET=Downloads

As per Section 2.6 on page 35, I'm able to Export the solution.

But when I open CodeWarrior and try to Import (as per Section 2.7.1 on pg. 36) I am unable to do so.

I get the message "No projects found to import"

It doesn't say exactly what type of file it's looking for, but it doesn't find it. I can see that there are .XML files but maybe it's looking for something else?

If I can't import these files into CodeWarrior, I can't load them into my ZigBEE NCB and SRB units for testing.

Any suggestions?

Thanks!

Re: BeeKit Export and Import into CodeWarrior

HJKIM — Wed, 08 Aug 2012 15:42:07 GMT

You can import the project using CodeWarrior 6.2.0

topic BeeKit Export and Import into CodeWarrior in OSBDM and TBDML

BeeKit Export and Import into CodeWarrior

Re: BeeKit Export and Import into CodeWarrior