AUTOSAR SW-C中的主题 Re: MPC5777C MCAL:ADC not support continuous mode without Interrupt

MPC5777C MCAL:ADC not support continuous mode without Interrupt

Ada_Lovelace — Wed, 15 Apr 2020 07:37:59 GMT

Dear all,

I have a prolem, when I use the MCAL4_3 , I configurate the ADC,but It has the error.

When I choose the continuous mode and "without interrupt" mode, it has an error that：without interrupt feature is not supported for continuous conversion mode.

Do MPC5777C must use interrupt mode about continuous mode?

Or there is a problem about MCAL4_3？

Re: MPC5777C MCAL:ADC not support continuous mode without Interrupt

mariuslucianand — Mon, 27 Jul 2020 10:20:40 GMT

Hello cuihan.ma@dotrustech.com‌,

In this community space, we are trying to answer questions related to AUTOSAR Application Layer generated directly from Matlab and Simulink. Please create a new thread on the MPC5xxx space or new NXP support case according to the following procedure: https://community.nxp.com/docs/DOC-329745

Hope this helps,

Marius

Re: MPC5777C MCAL:ADC not support continuous mode without Interrupt

Ada_Lovelace — Thu, 12 Aug 2021 09:53:53 GMT

I have solved the problem.MCAL4_3 version has the bug , update the MCAL4_3 , ADC calibration makes it work.