topic Openamp_rsc_table example for imx95_evk board. in Zephyr Project

Openamp_rsc_table example for imx95_evk board.

deepshika_borundiya — Mon, 14 Jul 2025 11:35:27 GMT

I am trying to run openamp_rsc_table example for imx95_evk board. On running west build command, zephyr.elf is generated. However, when I am running this elf file using remoteproc with Linux running on my A55 core, I don't see the messages sent between A Core and M Core. My M7 console only shows Zephyr Booting message and then halts. I have used yocto to generate Linux image for A55.

Re: Openamp_rsc_table example for imx95_evk board.

danielchen — Mon, 14 Jul 2025 15:15:27 GMT

could you please let us know the BSP version you are using?

Re: Openamp_rsc_table example for imx95_evk board.

deepshika_borundiya — Mon, 14 Jul 2025 15:28:09 GMT

i.MX Linux Yocto Project BSP 6.12.3_1.0.0 Release

Re: Openamp_rsc_table example for imx95_evk board.

danielchen — Sat, 19 Jul 2025 08:14:09 GMT

The openamp_rsc_table example now supports imx95_evk/m7. The A55 core must run linux-imx (tested with version 6.6.52 )

To run this sample, I would suggest you check the "Linux setup" and "Zephyr setup" in the readme file.

Please refer to below link for more details.

https://github.com/zephyrproject-rtos/zephyr/tree/main/samples/subsys/ipc/openamp_rsc_table

Regards

Daniel

Re: Openamp_rsc_table example for imx95_evk board.

deepshika_borundiya — Mon, 21 Jul 2025 09:01:17 GMT

Hi Daniel,
I tried building this example. However, SAMPLE_RPMSG_CLIENT configuration is not defined. Therefore, the module: rpmsg_client_sample.ko is not generated.
While the application is building and successfully generating zephyr.elf, on running this elf on A Core (linux), it is not executing beyond Zephyr Booting message.

Re: Openamp_rsc_table example for imx95_evk board.

danielchen — Thu, 24 Jul 2025 07:06:54 GMT

Hi @deepshika_borundiya

I can find the rpmsg_client_sample.ko under below folder. Can you try it again?

/usr/lib/modules/6.12.3-lts-next-g37d02f4dcbbe/kernel/samples/rpmsg/rpmsg_client_sample.ko

Regards

Daniel

Re: Openamp_rsc_table example for imx95_evk board.

deepshika_borundiya — Thu, 31 Jul 2025 06:45:46 GMT

Hi Daniel,
I had to add rpmsg_client_sample.c separately to linux build to generate an imx-image-full image. After copying zephyr_openamp_rsc_table.bin file and generating flash.bin, I booted the board. Post this my module is loaded but not in use. Moreover, my remoteproc's state is attached and I am unable to change the state.

root@imx95-19x19-lpddr5-evk:~# lsmod | grep rpmsg_client_sample
rpmsg_client_sample 12288 0
root@imx95-19x19-lpddr5-evk:~#
root@imx95-19x19-lpddr5-evk:~# ls /dev/ | grep rpmsg
rpmsg_ctrl0
root@imx95-19x19-lpddr5-evk:~# cat /sys/devices/platform/imx95-cm7/remoteproc/remoteproc1/state
attached
root@imx95-19x19-lpddr5-evk:~# echo stop > /sys/devices/platform/imx95-cm7/remoteproc/remoteproc1/state
-sh: echo: write error: No such process

Re: Openamp_rsc_table example for imx95_evk board.

danielchen — Wed, 06 Aug 2025 14:48:56 GMT

As far as I know, this is a known issue in BSP6.6.x, I will update you when this fix is merged.

I would suggest you refer to AN14748 for how to run application on M7 core of i.MX95.

https://docs.nxp.com/bundle/AN14748/page/topics/introduction.html

Regards

Daniel

Re: Openamp_rsc_table example for imx95_evk board.

danielchen — Wed, 13 Aug 2025 08:22:22 GMT

HI @deepshika_borundiya

please use the latest BSP, it fixed this issue.

Regards

Daniel