topic Re: Labtool - 88W8997 - iMX8M Linux Host in Wi-Fi® + Bluetooth® + 802.15.4

Labtool - 88W8997 - iMX8M Linux Host

amaggs — Wed, 01 Dec 2021 19:35:36 GMT

Hi There,

I have obtained Labtool but it is unclear on what needs to be running on the iMX8M Linux host system for Labtool to connect to.

I am assuming there is some application that needs to be cross compiled for the particular hardware/software configuration of the EVB noted above for Labtool to connect to?...

Any help is greatly appreciated!

Thanks,

Anthony

Re: Labtool - 88W8997 - iMX8M Linux Host

shaun_wu — Thu, 02 Dec 2021 03:19:05 GMT

Hello @amaggs

You could refer to following document for 8997 labtool setup:

88W8997_Labtool_User Guide

Best Regards

Shaun

Re: Labtool - 88W8997 - iMX8M Linux Host

amaggs — Thu, 02 Dec 2021 18:12:17 GMT

Hi Shaun,

Thank you very much for your response. Yes, I have reviewed this document. This document does a very good job of documenting what needs to be done when a bridge PC is being used but in our case the DUT is a "88W997 System"

Our host processor which is part of the 88W997 System is an iMX8M running Linux.

What needs to be running on our host and is there documentation for setting up our host? Should we consider our iMX8M as the bridge and follow bridge PC instructions?... I am not sure if this is possible, I will speak with embedded programmers internally.

Any help and assistance is greatly appreciated.

Thanks,

Anthony

Re: Labtool - 88W8997 - iMX8M Linux Host

shaun_wu — Fri, 03 Dec 2021 02:56:41 GMT

Hello @amaggs

You are right. Please run mfg_bridge on i.mx platform, run Labtool on host PC. Host PC and i.mx platform should under same subnet.

Re: Labtool - 88W8997 - iMX8M Linux Host

amaggs — Tue, 07 Dec 2021 19:38:07 GMT

Hi Shaun,

We were able to port mfgbridge to run on iMX8M. We are also able to run Labtool and it seems to be communicating with mfgbridge app. However, I cannot get any TX output when I run "802.11n Test Sequences - 5.2.4.1 Tx on Selected Path, 2.4 GHz, 20 MHz Bandwidth, MCS7 Data Rate" from Labtool user guide.

Please see Labtool commands and responses below.

Thanks,

Anthony

Name: Dut labtool

Version: 1.0.0.173

Date: Jul 7 2020 (00:57:53)

Note:

1. =========WiFi tool=============

2. =========BT tool=============

Enter CMD 99 to Exit

Enter option: 1

Name: DutApiClass

Interface: EtherNet

Version: 1.0.0.173

Date: Jul 7 2020 (00:56:49)

Note:

Dut's IP 192.168.0.10:9930

Host's IP 192.168.0.100:9931

DutIf_UdpIp::delay 0

DutIf_UdpIp::vg_IfSpy 0

_WSAStartup _socketCount=1

TCP connecting...

DutIf_InitConnection: 0x00000000

--------------------------------------------------------

W89xx (802.11a/g/b/n/ac) TEST MENU

--------------------------------------------------------

Enter option: 88

DLL Version : 1.0.0.173

LabTool Version: 1.0.0.173

DutIf_GetFWVersion: 0xFFFFFFF9

SOC OR Version: 0.0 Customer ID: 0

RF OR Version: 0.0 Customer ID: 0

Enter option: 35

DutIf_AdjustPcktSifs: 0xFFFFFFF9

Enter option: 10 3 3

DutIf_SetTxRxPath: Tx path to 3 : Rx path to 3 : status 0xFFFFFFF9

Enter option: 30 0

DutIf_SetModeAG: 0xFFFFFFF9

Enter option: 112 0

DutIf_SetChannelBw: 0xFFFFFFF9

Enter option: 12 6

DutIf_SetRfChannel: 0xFFFFFFF9

Enter option: 22 3 6 10 2

DutIf_SetRfChannel: 0xFFFFFFF9

Enter option: 35 1 22 1 100 F00

DutIf_AdjustPcktSifs: 0xFFFFFFF9

TRPC ID: 0xffffffff

Enter option: 35

DutIf_AdjustPcktSifs: 0xFFFFFFF9

Enter option:

Re: Labtool - 88W8997 - iMX8M Linux Host

shaun_wu — Wed, 08 Dec 2021 02:29:51 GMT

Hello @amaggs

Could you share driver version to us?

Re: Labtool - 88W8997 - iMX8M Linux Host

RichardFelician — Mon, 18 Jul 2022 16:02:39 GMT

Has anyone followed up on this issue we got the same result

Re: Labtool - 88W8997 - iMX8M Linux Host

chrisroed — Thu, 13 Mar 2025 16:24:12 GMT

Hi Shaun, I tried this link and the website is saying that I don't have permission to download the labtool user guide