LIN Callback Function(LIN Bootloader)

ganeshvaka2 — Wed, 16 Dec 2020 09:34:45 GMT

Hello all
we are working on Lin based bootloader for s32k116.we are facing issue with LIN call back function .when I connect Canoe and debugging code it's not hitting the LIN call back function (Response is not getting from ECU)
if you know anyone please help me out how to resolve the issue
The SW of the unified bootloader framework was downloaded .and i integrated as per Document

"https://www.nxp.com/downloads/en/snippets-boot-code-headers-monitors/unified_bootloader_framework.zi... "

Thank you
Ganesh Babu Vaka.

Re: LIN Callback Function(LIN Bootloader)

dianabatrlova — Mon, 04 Jan 2021 08:22:57 GMT

Hello,

Please, let me apologize for the delay. I have discussed this with the owner of this tool your both questions:

https://community.nxp.com/t5/S32K/S32K116-support-bootloader-by-LIN-communication/td-p/1203061

Please, see some issues below:

1. In LIN module, bind device is LPUART1. LPUART 1 is not config in pin_mux module. Please check the LIN over which LPUART device?

2. In the NXP bootloader project config the LPUART transmit pin is input/output.

3. Please remove 1 line code in Fls_app.c (line number 622)--> FlashErase --> eraseFlashStartAddr = s_pAppFlashMemoryInfo->xBlockStartLogicalAddr;

Please note: in the NXP bootloader project, PTA 7 is LIN_SLP. In your, project is PTD 5?

I hope it helps.

Best regards,

Diana

topic Re: LIN Callback Function(LIN Bootloader) in S32K

LIN Callback Function(LIN Bootloader)

Re: LIN Callback Function(LIN Bootloader)