topic Re: did not run without debugger in S32K

did not run without debugger

종찬박 — Thu, 31 Dec 2020 03:09:06 GMT

Hi, I'm jongchan.

I'm trying to execute S32K without debugger.

I referred below link.

https://community.nxp.com/t5/S32K/S32K188-runs-with-debugger-but-not-witout/m-p/1205346/emcs_t/S2h8ZW1haWx8dG9waWNfc3Vic2NyaXB0aW9ufEtKQzQ3RE9WQ1lIUU9KfDEyMDUzNDZ8U1VCU0NSSVBUSU9OU3xoSw#M9431

but I can't run my board after power reset.

How can I do for this problem?

Re: did not run without debugger

Robin_Shen — Mon, 04 Jan 2021 02:02:48 GMT

Hi jongchan,

I know that you have define START_FROM_FLASH in Standard S32DS Assembler -> Preprocessor

IDE: S32 Design Studio for S32 Platform - Version: 3.3 - Build id: 200610 MCU: S32K118 SDK: Seems that you are using "SDK RTM v4.0.1".

Did you created project with "S32DS Application project" button?

Have you tried "S32DS Project from example" button (hello_world_s32k118) and does it works fine with and without debugger?

Would you please attached a test project here? So that I can check it.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: did not run without debugger

종찬박 — Mon, 04 Jan 2021 02:24:27 GMT

Hi Robin,

Thanks. I am able to check my board run.