S32KのトピックS32K116 LIN Diagnostic Example

S32K116 LIN Diagnostic Example

chaitanya_kalyani — Wed, 09 Dec 2020 13:30:04 GMT

Hello,

I need to implement some UDS diagnostic services for project. For that I need LIN diagnostic example code.

I checked but not able to implement diagnostic services. Can you please provide me sample code for LIN diagnostic.

My device is slave and I have implemented below code for receiving data and data is receiving correctly

Below is for response and LIN_DRV_SendFrameData is returning success but not getting data on CANOe tool it just showing sending frame.

On CANOe I selected while sending 0x3C with Header and response.

Thank you in advance.

Re: S32K116 LIN Diagnostic Example

PetrS — Wed, 09 Dec 2020 21:35:26 GMT

Hi,

I think a S32DS demo example "lin_slave_baremetal_s32kxx" can be modified to handle MasterReq (0x3C) and SlaveResp (0x3D) diagnostic frames. The callback can be then

switch (lin1_State->currentEventId)
{
case LIN_PID_OK:
/* Set timeout */
LIN_DRV_SetTimeoutCounter(INST_LIN1, TIMEOUT);

/* If ID is 0x3C, slave node will receive data from master node */
if(0x3C == lin1_State->currentId)
{
/* Call to Receive Frame DATA Function */
LIN_DRV_ReceiveFrameData(INST_LIN1, rxBuff, sizeof(rxBuff));
}

/* If ID is 0x3D, slave node will send data */
if(0x3D == lin1_State->currentId)
{
/* Call to Send Frame DATA Function */
LIN_DRV_SendFrameData(INST_LIN1, txBuff2, sizeof(txBuff2));
}

From CANoe you first send MasterReq (0x3C) frame and later SlaveResp (0x3D) header to which slave should respond.

BR, Petr

Re: S32K116 LIN Diagnostic Example

chaitanya_kalyani — Mon, 21 Dec 2020 05:16:26 GMT

Hello @PetrS ,

As per your suggestion I updated code and getting response but value is getting updated for only one time from next time getting value as 0x0.

I am sending data through CANOe

We are working on LIN based bootloader and we need to solve this issue ASAP.

Quick response highly appreciated.

Thank you in advance.

Re: S32K116 LIN Diagnostic Example

pankajprasad100 — Thu, 03 Feb 2022 06:05:11 GMT

Hi,

Just modified the code while sending the Master request - frame, inside the code buffers are not updating same as @chaitanya_kalyani

But if I send 3D-frame I am getting the response.

Need help to update the buffer while sending the Master request - frame.

Re: S32K116 LIN Diagnostic Example

Mithra — Fri, 26 Apr 2024 10:35:11 GMT

Hi Chaitanya Kalyani,

I need to implement some DID's in UDS stack. So please can you guide me, how to implement this. Thanks, Ani