S32K中的主题 Re: Error in services launch sequence.

Error in services launch sequence.

Faker — Fri, 30 Oct 2020 11:14:42 GMT

Hi Expert:

I encounter a question in S32K166 device to debug or run example of LPUART. The Interface uses JTAG configured in debug configurations. With I pushing debug or run button, a dialog pops out that writes "Error in serices launch sequence, Starting J-Link GDB Server timed out".I don't know how to solve this problem,so I hope anyone here could help me.

Re: Error in services launch sequence.

Robin_Shen — Mon, 02 Nov 2020 02:42:24 GMT

Hi Faker,

There is a timeout value you can use for Launch the GDB server:
Please try to increase that zero value e.g. to 10, 100 or higher (I believe it it is in ms).

I hope this helps!

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: Error in services launch sequence.

Faker — Thu, 05 Nov 2020 06:59:49 GMT

Hi Robin,

The probelm has been solved by a way that this chip which is secure need to be unsecured.