S32KのトピックRe: can‘t debug jlink s32 ide 2018

can‘t debug jlink s32 ide 2018

yujinsheng — Mon, 26 Oct 2020 03:32:33 GMT

The problem is shown in figure Even in the demo project this is the same effect but it was not easy to use before for unknown reasons

11.png2.png3.png4.png

Re: can‘t debug jlink s32 ide 2018

danielmartynek — Tue, 27 Oct 2020 13:48:51 GMT

Hi,

You use an old version of the Design Studio.

Can you try with S32DS 2.2 or S32DS 3.3?

The configuration seems to be correct.

But I would recommend contacting Segger support, because the error was reported by the Segger plugin.

Regards,

Daniel

Re: can‘t debug jlink s32 ide 2018

yujinsheng — Wed, 28 Oct 2020 01:19:57 GMT

Thank you for your reply.

The error message forgot to provide, segger software can be linked, but our IDE can't, because colleagues' environment is 2018, I tried s32DS 2.2 is really good, but I want to know what's wrong with 2018, because we officially use 2018 in office.Want to find out why?

Re: can‘t debug jlink s32 ide 2018

yujinsheng — Wed, 28 Oct 2020 01:23:08 GMT

Thank you for your reply

Re: can‘t debug jlink s32 ide 2018

danielmartynek — Fri, 30 Oct 2020 08:28:03 GMT

Hi,

Did you import the project from an older S32DS version or was the project built in S32DS R1?

Thank you,

BR, Daniel

Re: can‘t debug jlink s32 ide 2018

yujinsheng — Mon, 02 Nov 2020 14:25:36 GMT

I'm trying to official demo, thanks for the reply, we have decided to use s32ds arm version 2.2 does not pursue the cause of the problem