S32K142 EVB board bricks

roshan0510 — Wed, 23 Sep 2020 07:48:58 GMT

we are using S32k142 eval board after flashing code generated from processor expert from S32DS using JTAG board got bricks.

we are not able to mass erase and not even able to debug.

Re: S32K142 EVB board bricks

Robin_Shen — Wed, 23 Sep 2020 08:56:58 GMT

Hi roshan0510,

Please use the default Jumper Settings.
Have you try to select Emergency Kinetis Device Recovery by Full Chip Erase in debug configurations?

I am able to debug S32K142EVB board by using on board OpenSDA with S32 Design Studio for ARM Version 2.2.

If still not work, please try to use the P&E Recovery Utility described in "Bricking and Recovering FRDM-KL25Z Boards: Reset, SWD Clock and Low Power ".

This tool is able to halt my chip.

Please try power cycling your board. The jumper of J10 can be used power cycling MCU too.

If the on board OpenSDA does not work, have you trid external debugger?(for example: P&E Multilink)

Please also check the OpenSDA information.

Best Regards,
Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic Re: S32K142 EVB board bricks in S32K

S32K142 EVB board bricks

Re: S32K142 EVB board bricks