S32KのトピックFrequency and Duty cycle calculation using dual edge capture https://community.nxp.com/t5/S32K/Frequency-and-Duty-cycle-calculation-using-dual-edge-capture/m-p/602596#M79 <HTML><HEAD></HEAD><BODY><P>Dear Support Team,</P><P></P><P>We are using Freedom board for s32k144. We wanted to calculate the duty cycle and frequency of input captured signal using dual edge capture mode.We couldn't be able to calculate both the parameter simultaneously using dual edge capture mode with same channel configuration.We don't want to use another channel for frequency/period calculation.Please guide how to achieve it.</P><P></P><P></P><P></P><P>BR,</P><P>Nitin verma</P></BODY></HTML> Tue, 21 Mar 2017 09:11:41 GMT nitinverma 2017-03-21T09:11:41Z Frequency and Duty cycle calculation using dual edge capture https://community.nxp.com/t5/S32K/Frequency-and-Duty-cycle-calculation-using-dual-edge-capture/m-p/602596#M79 <HTML><HEAD></HEAD><BODY><P>Dear Support Team,</P><P></P><P>We are using Freedom board for s32k144. We wanted to calculate the duty cycle and frequency of input captured signal using dual edge capture mode.We couldn't be able to calculate both the parameter simultaneously using dual edge capture mode with same channel configuration.We don't want to use another channel for frequency/period calculation.Please guide how to achieve it.</P><P></P><P></P><P></P><P>BR,</P><P>Nitin verma</P></BODY></HTML> Tue, 21 Mar 2017 09:11:41 GMT https://community.nxp.com/t5/S32K/Frequency-and-Duty-cycle-calculation-using-dual-edge-capture/m-p/602596#M79 nitinverma 2017-03-21T09:11:41Z Re: Frequency and Duty cycle calculation using dual edge capture https://community.nxp.com/t5/S32K/Frequency-and-Duty-cycle-calculation-using-dual-edge-capture/m-p/602597#M80 <HTML><HEAD></HEAD><BODY><P>Hi</P><P>The only example with dual-edge capture we have so far is for one-shot pulse measurement.</P><P>It might help. See the attached project.</P><P></P><P>Regards,</P><P>Daniel</P></BODY></HTML> Fri, 24 Mar 2017 11:09:53 GMT https://community.nxp.com/t5/S32K/Frequency-and-Duty-cycle-calculation-using-dual-edge-capture/m-p/602597#M80 danielmartynek 2017-03-24T11:09:53Z