S32KのトピックRe: Triggering can interrupt failed

Triggering can interrupt failed

shengzhibing — Mon, 27 Apr 2020 14:43:46 GMT

There is no trigger interrupt after sending the message. Is there any problem with my can initialization?

SOFT: S32DS for ARM 2018 R1.

CHIP：S32K118

send first message(Success):

send second message(Failure):

Thank you for your reply！！！

Re: Triggering can interrupt failed

Robin_Shen — Wed, 29 Apr 2020 03:09:41 GMT

Hi Zhibing,

Seems that you forgot set the corresponding IMASK1 bit.

Best Regards,

Robin

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Triggering can interrupt failed

shengzhibing — Wed, 29 Apr 2020 04:04:54 GMT

HI Robin_Shen:

Thank you for your reply!

My problem has been solved，I forgot to enable FlexCAN interrupts (^_^) and I did not set imask bit .

Best Wishes

Sheng