S32 Design Studio contiguous srec file

adria — Tue, 30 Jun 2020 12:19:04 GMT

Hello,

For S32K116, from the end of the interrupt vector table section until the start of the flash config section, there is a gap of memory unused. This gap is specified with zeros if a raw binary is generated. Instead, if srec file is generated, that space is not specified.

Is it possible to generate the srec file so it specifies all addresses so the whole addresses in the file are contiguous to each other?

Best regards,

Adria

Re: S32 Design Studio contiguous srec file

dianabatrlova — Wed, 01 Jul 2020 08:15:00 GMT

Hello Adria,

You can use the srec_cat tool for this purpose, see section "FILLING THE BLANKS" in the last link.

Please refer to the links below:

SRecord - Browse /srecord-win32 at SourceForge.net
Merging S19 Files | MCU on Eclipse
The link describes the usage http://srecord.sourceforge.net/man/man1/srec_examples.html

I hope it helps.

Best Regards,

Diana

topic S32 Design Studio contiguous srec file in S32K

S32 Design Studio contiguous srec file

Re: S32 Design Studio contiguous srec file