S32K中的主题 Re: MWCT2016 HSE 2.40.0 Secure Boot Configuration Failure- ImportPlainSymKeyReqMuChannel

MWCT2016 HSE 2.40.0 Secure Boot Configuration Failure- ImportPlainSymKeyReqMuChannel

ShrikantM — Fri, 25 Sep 2026 13:57:43 GMT

Environment

MCU: MWCT2016S based Wireless Charging Controller
Working Setup (Legacy):
- HSE FW Version: 2.6.0
- (Application + Secure Boot) merge hex.
New Setup (Failing):
- HSE FW Version: 2.40.0
- (Application + Secure Boot) merge hex.

We are migrating from HSE FW v2.6.0 to HSE FW v2.40.0 while maintaining the same Qi key provisioning and Secure Boot flow.

Problem Statement

With HSE FW v2.6.0, the complete provisioning sequence executes successfully:

HSE installation
Erase Keys
S2TP key slot provisioning
Qi key programming
Secure Boot configuration
Application boots successfully

With HSE FW v2.40.0, all provisioning steps complete successfully until Secure Boot configuration is started.

During Secure Boot configuration the following API fails:

ImportPlainSymKeyReqMuChannel() in secure boot code.

return HSE response: 0x55A5A399 which corresponds to:

#define HSE_SRV_RSP_INVALID_PARAM ((hseSrvResponse_t)0x55A5A399UL)

After this failure, Secure Boot configuration cannot be completed, and the ECU remains stuck in the Secure Boot code.

Provisioning Sequence

Working Configuration (HSE 2.6.0)

00_Blank_MWCT2016_CodeFlash_DataFlash.hex

Power Reset

01_HSE_flash.srec version 2.6.0

Power Reset

02_EraseKeysSW.hex

Power Reset

03_S2TP_KeySlotsAligned.srec S2TP SW Version: 1.1.1

Power Reset

Write Qi Keys via UART

Power Reset

Application+SecureBoot.hex

Power Reset

HSE response after merge hex flashing from UART log:

HseStatus : 2848

bit 0 : 0 RFU

bit 1 : 0 HSE_SHE_STATUS_SECURE_BOOT

bit 2 : 0 HSE_SHE_STATUS_SECURE_BOOT_INIT

bit 3 : 0 HSE_SHE_STATUS_SECURE_BOOT_FINISHED

bit 4 : 0 HSE_SHE_STATUS_SECURE_BOOT_OK

bit 5 : 1 HSE_STATUS_RNG_INIT_OK

bit 6 : 0 HSE_STATUS_HOST_DEBUGGER_ACTIVE

bit 7 : 0 HSE_STATUS_HSE_DEBUGGER_ACTIVE

bit 8 : 1 HSE_STATUS_INIT_OK

bit 9 : 1 HSE_STATUS_INSTALL_OK

bit 10 : 0 HSE_STATUS_BOOT_OK

bit 11 : 1 HSE_STATUS_CUST_SUPER_USER

bit 12 : 0 HSE_STATUS_OEM_SUPER_USER

bit 13 : 0 HSE_STATUS_FW_UPDATE_IN_PROGRESS

bit 14 : 0 RFU

bit 15 : 0 RFU

smrCoreStatus_Get :

smrCoreStatus[1] : 0 , smrCoreStatus[0] : 0

smrStatus[1] : 0 , smrStatus[0] : 0

Code debug log HSE response:

ImportPlainSymKeyReqMuChannel-hseResp: 0x55a5aa33

LoadBootMacKey-hseResp: 0x55a5aa33

Generic_ImportKeys-hseResp: 0x55a5aa33

KeyProvisioningForJTAG-status: 1

SecureBootConfiguration-hseResp: 0x55a5aa33

KeyProvisioningToHseNVM-status: 1

NON_SECURE_IVT-BLOCK1-hseResp: 0x55a5aa33

SECURE_IVT-BLOCK0-hseResp: 0x55a5aa33

writeDefaultData

Running Secure Boot CFG program

Hse-FW Version : 0.13.0.2.6.0 , full mem

using interface version : 0.13.0.2.6.0

HseStatus : 2862

bit 0 : 0 RFU

bit 1 : 1 HSE_SHE_STATUS_SECURE_BOOT

bit 2 : 1 HSE_SHE_STATUS_SECURE_BOOT_INIT

bit 3 : 1 HSE_SHE_STATUS_SECURE_BOOT_FINISHED

bit 4 : 0 HSE_SHE_STATUS_SECURE_BOOT_OK

bit 5 : 1 HSE_STATUS_RNG_INIT_OK

bit 6 : 0 HSE_STATUS_HOST_DEBUGGER_ACTIVE

bit 7 : 0 HSE_STATUS_HSE_DEBUGGER_ACTIVE

bit 8 : 1 HSE_STATUS_INIT_OK

bit 9 : 1 HSE_STATUS_INSTALL_OK

bit 10 : 0 HSE_STATUS_BOOT_OK

bit 11 : 1 HSE_STATUS_CUST_SUPER_USER

bit 12 : 0 HSE_STATUS_OEM_SUPER_USER

bit 13 : 0 HSE_STATUS_FW_UPDATE_IN_PROGRESS

bit 14 : 0 RFU

bit 15 : 0 RFU

smrCoreStatus_Get :

smrCoreStatus[1] : 0 , smrCoreStatus[0] : 0

smrStatus[1] : 1 , smrStatus[0] : 1

Failing Configuration-HSE FW 2.40.0 reports:

00_Blank_MWCT2016_CodeFlash_DataFlash.hex

Power Reset

01_S32K344_HSE_FW_UPDATE_v2_40_0.srec

Power Reset

02_M210WLCUMBCD00A_WSB00.31_EraseKeySW_UART_ENABLE.hex

Power Reset

03_S2TP_2_1_0_KeySlotsAligned.srec

Power Reset

Write Qi Keys via UART

Power Reset

Application+SecureBoot.hex

Power Reset

HseStatus : 2912

bit 0 : 0 RFU

bit 1 : 0 HSE_SHE_STATUS_SECURE_BOOT

bit 2 : 0 HSE_SHE_STATUS_SECURE_BOOT_INIT

bit 3 : 0 HSE_SHE_STATUS_SECURE_BOOT_FINISHED

bit 4 : 0 HSE_SHE_STATUS_SECURE_BOOT_OK

bit 5 : 1 HSE_STATUS_RNG_INIT_OK

bit 6 : 1 HSE_STATUS_HOST_DEBUGGER_ACTIVE

bit 7 : 0 HSE_STATUS_HSE_DEBUGGER_ACTIVE

bit 8 : 1 HSE_STATUS_INIT_OK

bit 9 : 1 HSE_STATUS_INSTALL_OK

bit 10 : 0 HSE_STATUS_BOOT_OK

bit 11 : 1 HSE_STATUS_CUST_SUPER_USER

bit 12 : 0 HSE_STATUS_OEM_SUPER_USER

bit 13 : 0 HSE_STATUS_FW_UPDATE_IN_PROGRESS

bit 14 : 0 RFU

bit 15 : 0 RFU

smrCoreStatus_Get :

smrCoreStatus[1] : 0 , smrCoreStatus[0] : 0

smrStatus[1] : 0 , smrStatus[0] : 0

ImportPlainSymKeyReqMuChannel-hseResp: 0x55A5A399

after Power reset:

UML SW Version : WSB00.3B_UART_ENABLE

Running Secure Boot CFG program

Hse-FW Version : 0.13.0.2.40.0 , full mem

using interface version : 0.13.0.2.40.0

HseStatus : 2848

bit 0 : 0 RFU

bit 1 : 0 HSE_SHE_STATUS_SECURE_BOOT

bit 2 : 0 HSE_SHE_STATUS_SECURE_BOOT_INIT

bit 3 : 0 HSE_SHE_STATUS_SECURE_BOOT_FINISHED

bit 4 : 0 HSE_SHE_STATUS_SECURE_BOOT_OK

bit 5 : 1 HSE_STATUS_RNG_INIT_OK

bit 6 : 0 HSE_STATUS_HOST_DEBUGGER_ACTIVE

bit 7 : 0 HSE_STATUS_HSE_DEBUGGER_ACTIVE

bit 8 : 1 HSE_STATUS_INIT_OK

bit 9 : 1 HSE_STATUS_INSTALL_OK

bit 10 : 0 HSE_STATUS_BOOT_OK

bit 11 : 1 HSE_STATUS_CUST_SUPER_USER

bit 12 : 0 HSE_STATUS_OEM_SUPER_USER

bit 13 : 0 HSE_STATUS_FW_UPDATE_IN_PROGRESS

bit 14 : 0 RFU

bit 15 : 0 RFU

smrCoreStatus_Get :

smrCoreStatus[1] : 0 , smrCoreStatus[0] : 0

smrStatus[1] : 0 , smrStatus[0] : 0

ImportPlainSymKeyReqMuChannel-hseResp: 0x55a5a399

ECU getting stuck in secure boot only

Re: MWCT2016 HSE 2.40.0 Secure Boot Configuration Failure- ImportPlainSymKeyReqMuChannel

VaneB — Fri, 25 Sep 2026 17:03:25 GMT

Hi @ShrikantM

Could you please share your key catalogs as well as the parameters used in the ImportPlainSymKeyReqMuChannel() function call? The reported error indicates that one or more HSE request parameters are invalid.

BR, VaneB

Re: MWCT2016 HSE 2.40.0 Secure Boot Configuration Failure- ImportPlainSymKeyReqMuChannel

SwapnilGawade — Mon, 28 Sep 2026 04:59:54 GMT

Hi @VaneB ,

We are using below key catalogs:

/* Table containing NVM key catalog entries */

const hseKeyGroupCfgEntry_t aHseNvmKeyCatalog[] =

{

/* NvmKeyGroup_0 */

{(HSE_MU0_MASK), HSE_KEY_OWNER_CUST, HSE_KEY_TYPE_SHE, 1U, 128U, {0U, 0U}},

/* NvmKeyGroup_1 */

{(HSE_MU0_MASK), HSE_KEY_OWNER_CUST, HSE_KEY_TYPE_ECC_PAIR, 1U, 256U, {0U, 0U}},

/* NvmKeyGroup_2 */

{(HSE_MU0_MASK), HSE_KEY_OWNER_CUST, HSE_KEY_TYPE_AES, 1U, 256U, {0U, 0U}},

/* Marker to end the key catalog */

{0U, 0U, 0U, 0U, 0U, {0U, 0U}}

};

/* Table containing RAM key catalog entries */

const hseKeyGroupCfgEntry_t aHseRamKeyCatalog[] =

{

/* RamKeyGroup_0 */

{(HSE_MU0_MASK), HSE_KEY_OWNER_CUST, HSE_KEY_TYPE_SHE, 1U, 128U, {0U, 0U}},

/* Marker to end the key catalog */

{0U, 0U, 0U, 0U, 0U, {0U, 0U}}

};

For below function we receive HSE_SRV_RSP_INVALID_PARAM

hseSrvResponse_t Generic_ImportKeys(void)

{

hseSrvResponse_t srvResponse = HSE_SRV_RSP_GENERAL_ERROR;

/*Import key linked with SMR#0*/

srvResponse = ImportPlainSymKeyReqMuChannel(

MU0,

1U,

NVM_AES128_BOOT_KEY,

HSE_KEY_TYPE_AES,

( HSE_KF_USAGE_VERIFY ),

0U,

aesEcbKeyLength,

aesEcbKey,

TRUE

);

ASSERT(HSE_SRV_RSP_OK == srvResponse );

if(HSE_SRV_RSP_OK != srvResponse)

goto exit;

/* load keys for SHE secure boot */

srvResponse = LoadBootMacKey();

ASSERT(HSE_SRV_RSP_OK == srvResponse );

if(HSE_SRV_RSP_OK != srvResponse)

goto exit;

exit:

return srvResponse;

}

Please check attached global_defs.h for more details about the parameters.

Thanks and Regards,

Swapnil Gawade

Re: MWCT2016 HSE 2.40.0 Secure Boot Configuration Failure- ImportPlainSymKeyReqMuChannel

VaneB — Mon, 28 Sep 2026 21:12:47 GMT

Hi @SwapnilGawade

Thank you for sharing the information. Based on your configuration, I have the following observations:

The SHE key group is configured with HSE_KEY_OWNER_CUST as the owner. However, the HSE Service API Reference Manual specifies that, for an SHE key catalog configuration, the owner of an SHE key group must be set to HSE_KEY_OWNER_ANY. This is also demonstrated in the NVM SHE Key Catalog Configuration example.
The targetKeyHandle passed to ImportPlainSymKeyReqMuChannel() is defined as:#define NVM_AES128_BOOT_KEY GET_KEY_HANDLE(HSE_KEY_CATALOG_ID_NVM, 1, 1)However, according to your NVM key catalog configuration, the AES key group is the third group (NvmKeyGroup_2). Based on this configuration, the correct definition for NVM_AES128_BOOT_KEY should be: GET_KEY_HANDLE(HSE_KEY_CATALOG_ID_NVM, 2, 0)