topic Re: S32DS 3.6 Installation guide in S32K

S32DS 3.6 Installation guide

FE — Wed, 06 May 2026 06:50:32 GMT

Hello Team,

Which Software Version of S32DS 3.6 is working and Support RTD6 and RTD3 ?
I have installed 3.6.4 while open peripherals i am getting error, I have attached.
Below i am attaching installation guide for S32D 3.5 version, if you have same document for S32DS 3.6 then please share.

Re: S32DS 3.6 Installation guide

Robin_Shen — Wed, 06 May 2026 08:08:13 GMT

A1: Unfortunately, there is no current way to install multiple RTD packages in the same instance, as a workaround, you can install multiple instances for S32DS like:
S32DS.3.6.6_S32K3_RTD300
S32DS.3.6.6_S32K3_RTD600
and then install specific RTD to each instance.

A2: The installation process for S32DSv3.6.x is no longer as complicated as that for S32DSv3.5.x.

Please watch the video: How To Download, Install and Configure the RTD 5.0.0 with S32 Design Studio 3.6.0
At 3:40 in the video RTD5.0_download_install_configure.mp4, you will see many examples after the S32K3 RTD is installed.

For you, you need to download and install S32K3 Real-Time Drivers Version 3.0.0 (SW32K3_RTD_4.4_R21-11_3.0.0_D2303_DS_updatesite.zip), not RTD 5.0.0.

Note install NXP GCC for Arm Embedded Processors v10.2 build 1728

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.

-------------------------------------------------------------------------------

Re: S32DS 3.6 Installation guide

FE — Wed, 06 May 2026 08:07:37 GMT

Thanks for response.
I need to install 3.6.6 and related RTD package.
What about error i am getting any update with respect to that?

Re: S32DS 3.6 Installation guide

Robin_Shen — Wed, 06 May 2026 08:11:16 GMT

Which RTD version was the original project based on? Will the problem still occur after installing the corresponding RTD?

Re: S32DS 3.6 Installation guide

FE — Wed, 06 May 2026 08:15:01 GMT

The Project is based on RTD6

Re: S32DS 3.6 Installation guide

Robin_Shen — Thu, 07 May 2026 02:00:31 GMT

Please check the Build Version of your project.
For example:
Siul2_Port_Ip_Example_S32K344_RTD600\RTD\src\Clock_Ip_Data.c
* Build Version : S32K3_RTD_6_0_0_D2506_ASR_REL_4_7_REV_0000_20250610

If possible, please send me your project separately. Let me try opening your project with S32DS v3.6.x to see if it also causes an error.

Re: S32DS 3.6 Installation guide

FE — Thu, 07 May 2026 03:26:12 GMT

Please find attached project.
Please confirm at your end which RTD and which 3.6 version is support then i can install that same version

Re: S32DS 3.6 Installation guide

Robin_Shen — Thu, 07 May 2026 04:45:01 GMT

Please read 009-006-252-003-246-002 WEB - ARMv7M_MPU GCC S32K344 readme.rtf :

SafeRTOS_S32K344_Demo_Web Instructions

This Demo application has been created with S32DS IDE 3.6.4with ARM GCC 11.4 for the S32K344 Boards.

Installing software:

====================

- In the IDE, from Help>S32 Extensions and Updates make sure you install the latest versions of:

- GNU ARM PEmicro Interface Debugging Support

- GDB Client for Arm Embedded Processors

- S32 Design Studio Platform package

- S32K3xx development package

- Download RTD 6.0.0 for S32K3 from NXP website. from the downloaded file Install the .exe file add the remaining .zip files from S32DS IDE Help>S32 Extensions and Updates/Add sites.

So please install S32DS v3.6.4 and S32K3 RTD 6.0.0.

Regarding the error, I suggest you contact WHIS technical support, which provided the example.

I suspect it might be because you haven't installed: 34-185-AN-001-i3.0-Installing and Using the Eclipse STATEVIEWER Plug-in.pdf