topic Re: S32 design example project UM11965 throws error while building project - CANHUBK344 in S32K

S32 design example project UM11965 throws error while building project - CANHUBK344

Prasanna2 — Tue, 09 Sep 2025 19:30:58 GMT

I am following Section 8 of UM 11965 (CANHUBK344), successfully did a offline install of the extensions & imported the sample project and did a build project. It throws multiple errors for the TODOs .. What should we do with the TODOs here, i have the reference kit hardware and in the user manual no mention of these TODOs. And also once i build the project could you share the link of how to flash the elf file using programmer ?

Re: S32 design example project UM11965 throws error while building project - CANHUBK344

Robin_Shen — Wed, 10 Sep 2025 08:55:05 GMT

There is no on-board debugger on the CANHUBK344 board. Did you connect external debugger(PEMicro Multilink or Segger J-Link) at P7A?

If you are using Segger J-Link, please refer to S32 Design Studio for S32 Platform V3.4/V3.5 + SEGGER J-LINK Plus

If you are using PEMicro Multilink, please refer to

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: S32 design example project UM11965 throws error while building project - CANHUBK344

Prasanna2 — Thu, 11 Sep 2025 04:45:27 GMT

Sorry let me rephrase my issue. The main issue relating to the build errors while compiling the sample code for CANHUBK344. I am following Section 8 of UM 11965 (CANHUBK344) & imported the sample project and did a build project. It throws multiple compilation errors for the TODOs in the sample code MR_CANHUBK3_IEEE1722 .. What should we do with the TODOs in the sample code here, i have the reference kit hardware and in the user manual no mention of these TODOs. How do i fix this compilation errors refer below the screentshot sample

Re: S32 design example project UM11965 throws error while building project - CANHUBK344

Robin_Shen — Thu, 11 Sep 2025 08:46:23 GMT

I am able to build this project without error

Re: S32 design example project UM11965 throws error while building project - CANHUBK344

Prasanna2 — Sat, 20 Sep 2025 01:04:04 GMT

Hello ,

Could you advise which is best option for programming & debugging ?

- PEM Micro Multi Link

- J-LINK

Or MCU-Link Debug probe

Or other option

Apart from flashing/programming i also want the better capabilities for debugging ..

Re: S32 design example project UM11965 throws error while building project - CANHUBK344

Robin_Shen — Mon, 22 Sep 2025 07:45:02 GMT

Lauterbach TRACE32
PEMicro Multilink
SEGGER J-Link