S32KのトピックRe: S32K3 IO initial after wake up

S32K3 IO initial after wake up

alan_yu — Fri, 22 Aug 2025 06:52:58 GMT

when S32K enter sleep and be waken up , do we need to initial io config again? I found that when I initial io again when wake up . io pads can not keep .(even though I select "pad keep enable" )

Re: S32K3 IO initial after wake up

Robin_Shen — Fri, 22 Aug 2025 09:14:22 GMT

For more detailed about Pad Keeping, I suggest referring to the discussion in Where does the program start running after S32K344 wakes up from standby?

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: S32K3 IO initial after wake up

Robin_Shen — Fri, 22 Aug 2025 09:19:59 GMT

Please ensure that you use your company email address when communicating with NXP so that we can prioritize your question accordingly. Thank you for your understanding.