S32KのトピックRe: S32K396 eFlexPWM - Complementary PWM, Half-Period ADC Trigger, Master Sync, and Safe Runtime Dut

S32K396 eFlexPWM - Complementary PWM, Half-Period ADC Trigger, Master Sync, and Safe Runtime Duty Up

Meetkumar — Wed, 13 Aug 2025 17:32:06 GMT

Dear Experts,

I am working on S32K396 with S32 Design Studio and the RTD SDK. My goal is to configure eFlexPWM with the following features:

Half-Period ADC Trigger Requirement:
In center-aligned mode, I need to trigger ADC exactly at half of the PWM period, either by:

Runtime Duty Update:
Duty cycle may change at runtime. Updates must occur only at the reload event to prevent output glitches.

Clarifications Needed:

How to configure the ticks for PWM period and duty
Which VALx event is recommended for half-period triggering in center-aligned mode?
How to route PWM events to ADC ?
How to set up master sync in SDK for multiple submodules?
How to combine complementary outputs, VAL events, and runtime duty updates without breaking sync?

Request:
Please provide:

Looking forward for your support.

Thank You,

#s32k396

#s32k396RTD

#eflexpwm

_Leo_ — Fri, 15 Aug 2025 22:44:33 GMT

Thank you for your interest in our products and for contributing to our community.

There is no such specific example, but in RTD 6.0.0 there are various examples for which address ADC and PWM features:

On the other hand, you could refer to AN14504 EV Traction Inverter Control Reference Design Gen 3 SW application note, which shows a similar peripheral integration like you describe.

For more details, please refer to EV-INVERTERGEN3.

I hope this information is helpful.

Meetkumar — Thu, 21 Aug 2025 15:47:55 GMT

Hi Leo,

Thanks for your previous response. I’m still unclear about a couple of points regarding the eFlex PWM module:

How is the peripheral clock frequency for the PWM module determined, and where can I find this in the documentation?
If I want to generate a 10 kHz PWM, what period (in ticks) should I configure in the submodules?

A brief clarification or example would help me proceed.

_Leo_ — Fri, 12 Sep 2025 20:58:02 GMT

Hi again,

More references:

If you have any further questions, please feel free to continue using our Technical Support Service by creating a new tickets.