Configuring MCAL AND Driver modules under Peripherals

ekmas-19 — Mon, 18 Aug 2025 15:30:11 GMT

I have added driver modules in the peripherals tab under the MCAL section. when i select a particular deriver, like SPI, there are many tabs with many options to configure. Some of it is obvious but much of it I am just guessing at.

Is there a guide on how to configure these options and what settings make sense? I interested in the SPI, MCU, MCL, platform and DIO modules.

Re: Configuring MCAL AND Driver modules under Peripherals

VaneB — Mon, 18 Aug 2025 20:03:50 GMT

Hi @ekmas-19

I recommend reviewing each Driver Integration Manual and the User Manual. These documents provide detailed information on driver limitations, hardware/software requirements, usage instructions, and configuration guidelines. You can find them, for example, at the following location:

C:\NXP\S32DS.3.6.2\S32DS\software\PlatformSDK_S32K3\RTD\I2c_TS_T40D34M60I0R0\doc

Additionally, the RTD includes several example projects covering most of the family’s modules. These examples are a great starting point to understand how the peripherals work and how they can be configured.

BR, VaneB

S32K中的主题 Configuring MCAL AND Driver modules under Peripherals

Configuring MCAL AND Driver modules under Peripherals

Re: Configuring MCAL AND Driver modules under Peripherals