topic Re: AUTOSAR 4.4 MCAL Port Module configuration in S32K

AUTOSAR 4.4 MCAL Port Module configuration

jwjung — Wed, 23 Jul 2025 04:41:09 GMT

hi,

i have some question about using MCAL Port Module.

in configuration, PortPin Slew Rate be set 0 but in generated code that parts are empty so that build error occured.(and i can't change that)

second,

i enable the Api to change PinMode and PinDirection, but can't call that function.

The gpio output control could not be performed because the direction of the port pin could not be changed.

give me some advise to use the MCAL Port Module.

thank you.

Re: AUTOSAR 4.4 MCAL Port Module configuration

Senlent — Wed, 23 Jul 2025 08:12:50 GMT

Hi@jwjung

Could you please tell me the RTD version you're using?

Also could you please open a example related to port in S32 DS and test again?

Re: AUTOSAR 4.4 MCAL Port Module configuration

jwjung — Wed, 23 Jul 2025 08:50:26 GMT

hi,

i used RTD 2.0.2 version.

i tried to use example pjt but i can't solve the problem like below.

thank you

Re: AUTOSAR 4.4 MCAL Port Module configuration

Senlent — Wed, 23 Jul 2025 10:14:13 GMT

Hi@jwjung

This should not be an error. You need to select the pins first in the "Pins" configuration interface.

Re: AUTOSAR 4.4 MCAL Port Module configuration

jwjung — Thu, 24 Jul 2025 09:40:49 GMT

hi,

in my mistake, transmitted other data.

i used SW32K3_RTD4.4_R21-11_3.0.0_D2303

and i wanna know about

in example code the configuration data is differ from mine.

example is not PortPin_Mode is __IN, it's GPIO, AND PortPin Slew RAte, PortPin Level Value is differ from mine.

can you advise me to do it right?

thank you.

Re: AUTOSAR 4.4 MCAL Port Module configuration

Senlent — Fri, 25 Jul 2025 01:46:12 GMT

Hi@jwjung

Please let me know which pin you want to configure? I can configure it and take a screenshot for your reference.

Re: AUTOSAR 4.4 MCAL Port Module configuration

jwjung — Fri, 25 Jul 2025 02:22:45 GMT

i'm trying to use PTB8 for GPIO port pin. and i named it LED1.

so that i configure the value like this.

picture 1) Port Configuration - PortConfigSet - PortContainer_0

picture 2) Port Configuration - PortGeneral

picutre 3) Dio Configuration - DioConfig

and the PIN_PORT BE generated like this. so that i write the code like below.

so, my question is,

i configure the configuration to use SetPinDirection and setPinMode Api but i can't call the function to use.

and the Port parameter is differ and do not initialize.

how do i have to do solve this error.

Re: AUTOSAR 4.4 MCAL Port Module configuration

Senlent — Fri, 25 Jul 2025 02:46:01 GMT

Hi@jwjung

RTD 2.0.X is already a very old version. The latest RTD version has been updated to RTD 6.0.0. And S32 DS V3.4 is also a very old IDE.
My suggestion is to install S32 DS V3.6 and RTD 6.0.0.

If you still encounter these problems on the new version, I can make some demos for you for reference.