S32KのトピックRe: eMIOS module of NXP s32k311 mcu

eMIOS module of NXP s32k311 mcu

piyush1 — Sat, 19 Jul 2025 05:11:55 GMT

hello nxp team....

i am working on s32k311 mcu and not able to understand this emios module and how to configure it and its registers and buses and channels and alll.....please help me out in detailes so that i can configure it by myself

Re: eMIOS module of NXP s32k311 mcu

Robin_Shen — Mon, 21 Jul 2025 02:19:21 GMT

I recommend you to read S32K3_RTD_Training_eMIOS_public.pdf attached in S32K311 EMIOS GPT

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "ACCEPT AS SOLUTION" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: eMIOS module of NXP s32k311 mcu

piyush1 — Mon, 21 Jul 2025 11:36:27 GMT

/* Including necessary configuration files. */

#include "Mcal.h"

#include"s32k311.h"

#include "Clock_Ip.h"

#include "Emios_Pwm_Ip.h"

#include "Emios_Mcl_Ip.h"

#include "Siul2_Port_Ip.h"

//#define NUM_BLINK_LED (uint32)10U

//#define DELAY_TIMER (uint32)5000000U

#define INSTANCE_0 (uint8)0U

#define INSTANCE_1 (uint8)1U

#define CHANNEL_12 (uint8)12U

#define CHANNEL_23 (uint8)23U

volatile int exit_code = 0;

/* User includes */

/*!

\brief The main function for the project.

\details The startup initialization sequence is the following:

* - startup asm routine

* - main()

int main(void)

{

/* Write your code here */

/* Initialize clock */

Clock_Ip_Init(&Clock_Ip_aClockConfig[0U]);

/* Initialize all pins using the Port driver */

Siul2_Port_Ip_Init(NUM_OF_CONFIGURED_PINS_PortContainer_0_BOARD_InitPeripherals, g_pin_mux_InitConfigArr_PortContainer_0_BOARD_InitPeripherals);

/* Initialize EMIOS MCL driver */

Emios_Mcl_Ip_Init(INSTANCE_1, &Emios_Mcl_Ip_Sa_1_Config);

//Emios_Mcl_Ip_Init(INSTANCE_0, &Emios_Mcl_Ip_Sa_0_Config);

/* Initialize EMIOS PWM driver */

//Emios_Pwm_Ip_InitChannel(EMIOS_PWM_IP_VS_0_I1_CH12_CFG, &Emios_Pwm_Ip_VS_0_I1_Ch12);

Emios_Pwm_Ip_InitChannel(EMIOS_PWM_IP_SA_I1_CH12_CFG, &Emios_Pwm_Ip_Sa_I1_Ch12);

/* Set new period for the channels that used external counter bus */

Emios_Mcl_Ip_SetCounterBusPeriod(INSTANCE_1, CHANNEL_23, 15000);

Emios_Pwm_Ip_SetDutyCycle(INSTANCE_1, CHANNEL_12, 7500);

/* Using duty 0% and 100% to blink LED */

while(1)

{

}

return exit_code;

}

/** @} */

I HAVE WRITTEN THIS CODE TO GENERATE SIMPLE PWM SIGNAL WITH EMIOS1 CH12 ON
PTD6 PIN OF S32K31XEVB-Q100 FOR S32K311,
BUT I AM NOT GETTING ANY SIGNAL..PLEASE RESOLE AND HELP.

Re: eMIOS module of NXP s32k311 mcu

Robin_Shen — Tue, 22 Jul 2025 05:08:11 GMT

Please send me the test project to check. It is difficult for me to find the root cause by only looking at the code without looking at the peripheral configuration in the S32 Configuration Tool.

Re: eMIOS module of NXP s32k311 mcu

piyush1 — Tue, 22 Jul 2025 06:58:01 GMT

i solved the issue but now i have few questions like
1.for OPWMB mode prescaler is fixed??
2.is the global counter bus configurations are in emios_mcl_ip driver?
3. there are 24 channels ..so for every channel is it necessary to configure global bus counter?

like i need to generate normal pwm signals, complementary pwm signals.....so what things i need to configure and take care ?

Re: eMIOS module of NXP s32k311 mcu

Robin_Shen — Wed, 23 Jul 2025 09:29:18 GMT

A1. Note Clock prescaler(Internal Prescaler) Will only have an effect in OPWFMB and OPMCB modes.(Shown in S32 Configuration Tool). If OPWMB mode is selected, only global prescaler(Master Bus Prescaler) is active by using S32CT.

A2. The global counter bus configurations are in emios_mcl_ip driver.

A3. Depending on the emios mode you choose, there is no need to add the global counter bus repeatedly.

About PWM complementary I suggest you refer to AN14429: Dual 3-phase 48V PMSM Motor Control Kit with S32K344 using RTD low-level API

C:\NXP\MC_DevKits\MCSPTE1AK344\doc\ApplicationNotes\AN13767 3-phase Sensorless PMSM Motor Control Kit with S32K344 using RTD Low Level API.pdf

Re: eMIOS module of NXP s32k311 mcu

piyush1 — Wed, 23 Jul 2025 09:49:47 GMT

can you explain me what is this default period and offset at start??? i didn't get where it relates...

Re: eMIOS module of NXP s32k311 mcu

Robin_Shen — Thu, 24 Jul 2025 07:15:12 GMT

Please read the section 63.5.3.18 Output PWM Buffered (OPWMB) mode of S32K3XXRM and section 3. EmiosMclEnableGlobalTimeBase: Enable global timebase or disable on EMIOS IP. of RTD_MCL_UM.pdf.

Since the master bus of the OPWMB you selected is in MCB mode, I think Offset at start will not have any effect.

As per Default period, shown the Selected counter bus in 63.5.3.18.5 Timing example: matches and flags of S32K3XXRM.