topic Re: meminfls_mainfunction causes the hardfault in S32K

meminfls_mainfunction causes the hardfault

qimao-marvin — Wed, 04 Jun 2025 13:17:04 GMT

RTD:3.0.0 P07

AR:9.30.1

EB:29.0

as the function described below,when uses the iar to download and debug,it will cause hardfault;but if i try tu debug with hal_dataflash_write，everything works well.

can any one give me some advices?

Thanks

Re: meminfls_mainfunction causes the hardfault

danielmartynek — Fri, 06 Jun 2025 08:03:09 GMT

Hi @qimao-marvin,

Hard to say just from the description, but the driver must not be in the programmed flash block.

I see you program block_0 at 0x400000 where the application typically is.

The Mem_43_INFSL driver can use SRAM (below S32DS IDE configurator).

Regards,

Daniel

Re: meminfls_mainfunction causes the hardfault

qimao-marvin — Fri, 13 Jun 2025 17:38:14 GMT

Because the address i try to erase and prohran in at the bank of the functiob, the 0x400000 - 0x500000 is the one bank, but even i put the code in the ram ,it caused the hardfault too,however ,if i erase at the 0x500000,the function runs well.

So why even the code runs in sram,it will cause hardfault when tried to program at 0x400000?