S32KのトピックRAppID bootloader S32K144

RAppID bootloader S32K144

yogesh_khedkar — Sat, 13 Jul 2019 18:04:07 GMT

Hello Community,

I'm new user of s32k1xx series controller. Im using the s32k Design studio and i was trying the sample SDK example given in the IDE. When i was trying RAppID bootloader S32K144 i was getting the following error while starting the bootloader...

I have modified the .rbl file and updated the .srec path, i'm following the procedure mentioned in the .rbl file.....

I have connected my EVB with OpenSDA ...

Any suggestions or help will be appreciated.... :-)

Re: RAppID bootloader S32K144

jiri_kral — Mon, 15 Jul 2019 08:02:55 GMT

Hi,

did you tried cycle power of the board as is suggested in error message? There is timeout in Bootloader app. The communication should be started shortly after Board is powered up (not sure about delay value - it is probably something like 10 sec).

Jiri

Re: RAppID bootloader S32K144

lukaszadrapa — Mon, 15 Jul 2019 10:28:34 GMT

Hi,

due to nature of serial-to-USB bridge, my recommendation is to reset the device by reset button only. Do not do power-off / power-on sequence. This could help.

Regards,

Lukas