S32K中的主题 S32 Design Studio - ld returned 5 exit status

S32 Design Studio - ld returned 5 exit status

Durgaprasad02 — Thu, 20 Mar 2025 05:09:20 GMT

Hi,

I'm encountering the following error during the build process:.

Invoking: Standard S32DS C Linker
arm-none-eabi-gcc -o "can_pal_s32k118.elf" "@can_pal_s32k118.args"
collect2.exe: error: ld returned 5 exit status
make: *** [makefile:47: can_pal_s32k118.elf] Error 1
make -j14 all" terminated with exit code 2. Build might be incomplete.

Could you please help me resolve this issue?

Re: S32 Design Studio - ld returned 5 exit status

petervlna — Thu, 20 Mar 2025 08:11:12 GMT

Hello,

Hard to say, you can try to enabled verbose mode and put whole output from build console.

Best regards,

Peter

Re: S32 Design Studio - ld returned 5 exit status

Durgaprasad02 — Thu, 20 Mar 2025 09:08:59 GMT

Hello peter,

Same error after enabling that check box too.

Re: S32 Design Studio - ld returned 5 exit status

petervlna — Thu, 20 Mar 2025 12:44:18 GMT

Hello,

Could you share which version of S32DS you are using?

Best regards,

Peter

Re: S32 Design Studio - ld returned 5 exit status

Durgaprasad02 — Fri, 21 Mar 2025 04:27:36 GMT

Re: S32 Design Studio - ld returned 5 exit status

jiri_kral — Fri, 21 Mar 2025 08:01:21 GMT

Hi,

can you please share full output from build console?

If you delete (or make backup and delete it from workspace, if it is modified example) the project and create it again from File -> Project from Example, is the behavior same? If So, try to create new workspace.

Re: S32 Design Studio - ld returned 5 exit status

Durgaprasad02 — Fri, 21 Mar 2025 08:54:09 GMT

Hi jiri,

Please find attached console data for your reference.

Re: S32 Design Studio - ld returned 5 exit status

jiri_kral — Fri, 21 Mar 2025 11:45:13 GMT

Everything looks okay, except the linker error.

Please try another example or create new workspace and open again can_pal example in new workspace.

Re: S32 Design Studio - ld returned 5 exit status

Durgaprasad02 — Sat, 22 Mar 2025 05:22:35 GMT

Hi Jiri,

getting same.

Re: S32 Design Studio - ld returned 5 exit status

petervlna — Fri, 28 Mar 2025 08:05:25 GMT

Hello,

were you able to resolve the issue or it is the same.

Did you try it also on different PC?

best regards,

Peter