S32K中的主题 S32DS 3.5 Activate failed

S32DS 3.5 Activate failed

Maka_Zhang — Fri, 14 Mar 2025 06:54:48 GMT

Hello, When I installed 32 Design Studio for S32 Platform 3.5 to activate the activation code, An Error sending anactivation request to a remote activation server and processing there sulting occurred Response. (FNPerror50040, 41147102, 50), I downloaded this software before, but installed an incompatible RTM package, resulting in the software can not open ，then uninstall, don't know whether I didn't delete clean, install again has been stuck in this place doesn't go up，I can confirm that activation code is right, have tried the online and offline installation, all can't，If anyone has encountered this problem, I hope you could help comment on it

Re: S32DS 3.5 Activate failed

jiri_kral — Fri, 14 Mar 2025 11:04:14 GMT

Hi,

I checked your account and it looks that you was able activate S32DS v3.5 - Am I right?

Re: S32DS 3.5 Activate failed

Maka_Zhang — Mon, 17 Mar 2025 08:42:47 GMT

hi, Thank you for your reply. I couldn't use the 3.5 software after installing an inappropriate

package, so I re-downloaded the software, but couldn't activate it again. I attached the installation log on it, you can have a look.

Re: S32DS 3.5 Activate failed

Maka_Zhang — Mon, 17 Mar 2025 08:46:33 GMT

log

Re: S32DS 3.5 Activate failed

jiri_kral — Wed, 19 Mar 2025 13:59:58 GMT

Did you uninstall previous S32DS v3.5 first with Uninstall S32 Design Studio for S32 Platform 3.5.exe executable? Located in c:\NXP\S32DS.3.5.11\_S32 Design Studio for S32 Platform 3.5_installation\ folder?

Re: S32DS 3.5 Activate failed

Maka_Zhang — Thu, 20 Mar 2025 01:31:16 GMT

Thanks for your reply before, I have been able to reinstall now. But I had a new problem, a compilation error occurs. Current version of the toolchain is no longer supported. It is necessary to perform project migration to a later version, what should I do

Re: S32DS 3.5 Activate failed

Maka_Zhang — Thu, 20 Mar 2025 02:26:36 GMT

There were two files that couldn't be installed when I installed RTM4.0.2, but they could be installed before I reinstalled the S32DS

Re: S32DS 3.5 Activate failed

jiri_kral — Thu, 20 Mar 2025 09:08:48 GMT

Hi,

with what S32DS version was your project originally created? It is possible share the project? What is target device?

Re: S32DS 3.5 Activate failed

Maka_Zhang — Thu, 20 Mar 2025 09:27:20 GMT

I'm sorry that the project cannot be sent to you. Can you ask why this path is invalid? How should it be changed

Re: S32DS 3.5 Activate failed

jiri_kral — Thu, 20 Mar 2025 09:53:14 GMT

It looks that your project is based on older S32DS version, but it depends on which one. Assuming that your target device is S32K1xx . If So and you have an older project, I suggest to use S32DS v3.4 which has better support for S32K1xx devices.