Flashing data into S32K144 internal Flash memory by using autosar Flash driver specification

aimaier — Thu, 16 May 2019 08:26:02 GMT

I have encountered a problem when flashing data into S32K144 internal Flash memory by using autosar Flash driver specification, fashed 8bytes data into memory by calling the Fls_write() and Fls_main function and then I checked the job result by calling function Fls_getjobResult() and I got a job failed result,but strange things is the data has been stored into already and I got a failed result . The consequent write operation some times could be done and some times not! Before writing data, I have configured the Flash module properly by using EB tresos tool and I'm sure I have initialized the module before using it, so what was going on here? Anybody call tells me what's the problem is, I'll appreciate your help!

Re: Flashing data into S32K144 internal Flash memory by using autosar Flash driver specification

lukaszadrapa — Fri, 17 May 2019 11:59:19 GMT

Hi,

in case of questions related to Autosar, it's better to enter a ticket:

http://nxpcommunity.force.com/community/CommunityContextPage

Thanks,

Lukas

topic Flashing data into S32K144 internal Flash memory by using autosar Flash driver specification in S32K

Flashing data into S32K144 internal Flash memory by using autosar Flash driver specification

Re: Flashing data into S32K144 internal Flash memory by using autosar Flash driver specification