S32KのトピックRe: HSE Response Error

HSE Response Error

Vamsi421 — Tue, 12 Nov 2024 07:24:57 GMT

Hi,

Currently i am working on NXPs32k344 board for Encryption and decryption. For that I am using Cypto_driver and example application (Crypto_Symmetric_S32K344)given in s32 design studio but that example is not working it struck in the while loop that i shared in the document.

Re: HSE Response Error

VaneB — Tue, 12 Nov 2024 17:06:49 GMT

Hi @Vamsi421

This application requires HSE FW to run, have you already installed the FW? If so, did you select the nxp_s32k344_1x32x980k_hse_enabled algorithm in the Flash Algorithm Selection of the Debug Configurations?

BR, VaneB

Re: HSE Response Error

Vamsi421 — Fri, 29 Nov 2024 06:35:36 GMT

Hi @VaneB ,

I am trying A/b swap ota feature in nxps32k344. In this process i am using hse feature ,i collect the .bin file of the new firmware and placed it in the memory address of 0x005000000h and run the program . After completion of my program run i reset my board but i didn't get any update firmware and i tried to flash another program my board got disconnected and provided the error logs as shared in below attachments.