S32KのトピックRe: Hard Fault in C40_Ip_MainInterfaceHVJobStatus api when flash is erase in s32k312

Hard Fault in C40_Ip_MainInterfaceHVJobStatus api when flash is erase in s32k312

EddiePark — Wed, 27 Nov 2024 02:17:03 GMT

Hi NXP team.

The HardFault(1.jpg) issue happens while checking sector(0x00400000) erase functionality of S32K312.

The below API functions have to be placed into SRAM (".ramcode" section), as the attached files(2.jpg).

C40_Ip_MainInterfaceSectorErase
C40_Ip_MainInterfaceSectorEraseStatus
C40_Ip_MainInterfaceWrite
C40_Ip_MainInterfaceWriteStatus Could you please let me know to resolve this issue?

danielmartynek — Wed, 27 Nov 2024 14:35:54 GMT

Please specify the RTD revision.

Does the fault occur during or after the flash operation?

If you are erasing the sector starting at 0x00400000, where is the application code located?

As discussed here:

Place this function to SRAM too:

C40_Ip_MainInterfaceHVJobStatus()

Check the .map file to confirm the functions are in SRAM.

Regards,

Daniel

EddiePark — Fri, 29 Nov 2024 00:15:58 GMT

Hi Daniel.

This issue is resolved.
Thank you for your support.

BRs.

Eddie Park