S32KのトピックRe: s32k3x4-t172 debug error

s32k3x4 -t172 debug error

ash123456789 — Wed, 09 Oct 2024 03:41:47 GMT

why i am getting this error

Re: s32k3x4 -t172 debug error

Robin_Shen — Wed, 09 Oct 2024 06:26:48 GMT

It is recommended to use the onboard OpenSDA (J40) debugger.

Are you using an external PEMicro Multilink debugger? If so, please note:
"USB Multilink FX RevA and Universal Rev A and B are based on legacy UF32 USB devices, which are no longer actively supported/validated by PEmicro under the latest plugins/software packages.
To get latest support user would need Multilink FX Rev C, Multilink Universal Rev C/D or Multilink ACP"

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: s32k3x4 -t172 debug error

ash123456789 — Wed, 09 Oct 2024 09:24:27 GMT

how to configure and where to download

Re: s32k3x4 -t172 debug error

ash123456789 — Wed, 09 Oct 2024 10:39:53 GMT

i am not using external debugger its on board debugger only

Re: s32k3x4 -t172 debug error

Robin_Shen — Thu, 10 Oct 2024 04:22:19 GMT

Please tell me:
Which version of Update did you install for S32DS v3.5?
Which version of S32K3 RTD?
Did you update PEMicro Software?
Which S32K3 development board? S32K3X4EVB-T172 RevB or RevB2?
I have not encountered this problem with the onboard OpenSDA, only when using the external PEMicro Multilink.

Re: s32k3x4 -t172 debug error

ash123456789 — Fri, 11 Oct 2024 08:48:58 GMT

version for s32DS is 3.5
and RTD 5.0.0
yes
s32k3x4evb-T172 REV B2
I just check with open sda

Re: s32k3x4 -t172 debug error

ash123456789 — Fri, 11 Oct 2024 08:50:07 GMT

I am using only Onboard OPEN SDA debugger

Re: s32k3x4 -t172 debug error

Robin_Shen — Fri, 11 Oct 2024 09:04:56 GMT

I don't have this problem, please compare my Installation Details

Re: s32k3x4-t172 debug error

ash123456789 — Mon, 14 Oct 2024 09:21:18 GMT

i already have all software installed still i am getting an error message but for Dio example it works after trying 4 to 5 time but not for pother peripheral

Re: s32k3x4-t172 debug error

Robin_Shen — Tue, 15 Oct 2024 04:41:14 GMT

I updated PEMicro software and S32DS Update 14 but still can't reproduce the problem you mentioned. Do you have other development boards? Also, do your colleagues encounter this problem?
In addition, from the ssb.PNG, I can see that the S32K3 RTD you installed is version 3.0.0 P01 instead of the RTD 5.0.0 you mentioned before.

Re: s32k3x4-t172 debug error

ash123456789 — Tue, 15 Oct 2024 04:44:18 GMT

I change probe its working fine thank you