S32Kのトピックs32k144 gpio

s32k144 gpio

fengba_360 — Sun, 13 Oct 2024 13:44:38 GMT

Hello, I'm encountering an issue when using the s32k144. During system initialization, when calling PINS_DRV_Init(NUM_OF_CONFIGURED_PINS, g_pin_mux_InitConfigArr);

it jumps into the DefaultISR. I've attached my code. Could you please help me with some guidance?

微信图片_20241013213637.png微信图片_20241013213713.png

Re: s32k144 gpio

Robin_Shen — Mon, 14 Oct 2024 01:43:03 GMT

Please use CLOCK_DRV_Init instead of CLOCK_SYS_Init and CLOCK_SYS_UpdateConfiguration. For more detail, please refer to the discussion in Issue in system clock initialization for S32K148.

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: s32k144 gpio

fengba_360 — Mon, 14 Oct 2024 14:14:24 GMT

thanks，I have already solved it, it's because of the crystal oscillator issue

Re: s32k144 gpio

V_aug — Wed, 30 Oct 2024 06:34:44 GMT

Hello, did you use an external crystal oscillator? I did not use the external crystal oscillator, and then only opened FIRC, and the same situation occurred. Could you please help me take a look? thank you

Re: s32k144 gpio

Robin_Shen — Thu, 31 Oct 2024 02:06:03 GMT

Please click ASK A QUESTION in S32K - NXP Community. Let's discuss in your question thread.