S32KのトピックRe: Error when using S32K14 AutoSAR OS

Error when using S32K14 AutoSAR OS

geweilin — Sat, 23 Mar 2019 13:24:00 GMT

I installed tresos Studio 23.0 , Autosar OS(SW32K14-OS401-RTM-1.0.0 b4.0.98) and Autosar MCAL(SW32K14-MCAL401-RTMC-1.0.4).

The result is that MCAL is used and tested good.

But when I try to generate OS configuration file(.c,.h), it gives the following 3 error:

1. Failed to run generator "Os_TS_T40D2M4I0R98GeneratorId" (mode: "generate") for module "Os_TS_T40D2M4I0R98"

2. Error in external generator: fatal 0201: 'S32K' target is not supported by your license!
Used generator commandline: C:\EB\tresos23\..\..\NXP\AUTOSAR\S32K_AUTOSAR_OS_4_0_98_RTM_1_0_0\os_ts\eclipse\plugins\Os_TS_T40D2M4I0R98\..\..\..\..\ssc\bin\generator\sg.exe C:\Users\weilin.ge\Desktop\os_sample_sc1\output\generated\epc\project.epc

3. The external generator for module Os_TS_T40D2M4I0R98 terminated with exit code 9
Used generator commandline: C:\EB\tresos23\..\..\NXP\AUTOSAR\S32K_AUTOSAR_OS_4_0_98_RTM_1_0_0\os_ts\eclipse\plugins\Os_TS_T40D2M4I0R98\..\..\..\..\ssc\bin\generator\sg.exe C:\Users\weilin.ge\Desktop\os_sample_sc1\output\generated\epc\project.epc

I want to what's the problem reason? and how to resolve it?

Thanks.

Re: Error when using S32K14 AutoSAR OS

martin_kovar — Mon, 25 Mar 2019 09:35:28 GMT

Hello,

I created ticket with your question for Automotive Software team. The will contact you back directly via email. Please let me know here, if you do not receive reply until end of this week.

Regards,

Martin

Re: Error when using S32K14 AutoSAR OS

江洪秦 — Mon, 26 Aug 2019 01:45:24 GMT

I have the same problem. Do you know how to solve it ?

Re: Error when using S32K14 AutoSAR OS

江洪秦 — Mon, 26 Aug 2019 07:37:51 GMT

Hi, Martin,

Could you share the solved method?

Re: Error when using S32K14 AutoSAR OS

xinxin_you — Fri, 06 Sep 2019 06:06:07 GMT

I meet this problem.How to slove it?

Re: Error when using S32K14 AutoSAR OS

allenlw — Thu, 31 Oct 2019 06:01:47 GMT

the OS generator need a java run enrivonment, so you need to download a JRE from the official site and install it . I think it wil solve your problem.

Re: Error when using S32K14 AutoSAR OS

qianyanhua — Mon, 16 Dec 2019 03:25:02 GMT

When I use the sample,it's OK;but when I create my project,or change the sample,it's the same error "The external generator for module Os_T40D2M4I0R98 terminated with exit code 7".

Re: Error when using S32K14 AutoSAR OS

allenlw — Tue, 17 Dec 2019 01:07:53 GMT

do you install the JRE like I said before?

Re: Error when using S32K14 AutoSAR OS

qianyanhua — Tue, 17 Dec 2019 01:20:07 GMT

Yes,before I install JRE, the sample generate is not OK,but after that,it's OK.Error reappears when I use a new project,or change the samle.

qianyanhua@cncaea.cn

Re: Error when using S32K14 AutoSAR OS

qianyanhua — Tue, 17 Dec 2019 01:49:16 GMT

Yes,I did it,but when I create a new project ,the error reappears.

Re: Error when using S32K14 AutoSAR OS

allenlw — Tue, 17 Dec 2019 05:41:48 GMT

I don't know what exactly the problem you meet, but you can find a decimal number at the front end of the error message, then look it up at the 21.4 list of messages in the AUTOSAR_OSS32K_TR, it's a document in the OS installation folder, hope this will help you.

Re: Error when using S32K14 AutoSAR OS

lubo_NEW — Sat, 23 Jan 2021 07:29:15 GMT

I meet this problem.How to slove it?

Re: Error when using S32K14 AutoSAR OS

Simin — Mon, 16 Aug 2021 05:50:02 GMT

Hi，

I also have this problem too，and don't know how to solve it，pls support me，thank you very much

Best regards,

simin