topic Re: MCSXTE2BK142_PMSM_FOC_1Sh build error in S32K

MCSXTE2BK142_PMSM_FOC_1Sh build error

June6 — Mon, 01 Jul 2024 10:53:53 GMT

Hello

I installed the sw "MCSXTE2BK142_PMSM_FOC_1Sh" and found AMMClib in this SW is version 1.1.15,then I changed the AMMClib from V1.1.15 to V 1.1.19. But after building, S32DS shows the error "Description Resource Path Location Type Ld error: cannot find - lC:NXPAMMCLIBS32K14x_AMMCLIB_v1.1.19libs32ds_arm32S32K14x_AMMCLIB.a C/C++ Problem".

The configuration as below pictures,could you help me find the reason for this error?

Thank you very much!

Re: MCSXTE2BK142_PMSM_FOC_1Sh build error

VaneB — Mon, 01 Jul 2024 22:14:01 GMT

Hi @June6

Check the following thread. It has information related to the topic that you may find useful.

S32K116 BLDC/PMSM Motor control kit bring up

B.R.

VaneB

Re: MCSXTE2BK142_PMSM_FOC_1Sh build error

June6 — Tue, 02 Jul 2024 01:56:14 GMT

Hi VaneB

Thank you for your support.

I checked my settings,and these settings also comply with all the suggestions mentioned in the link. But after Clean Project and Build Project, the error is still here.

Re: MCSXTE2BK142_PMSM_FOC_1Sh build error

VaneB — Tue, 02 Jul 2024 20:20:04 GMT

Hi @June6

I have compared the changes you made to what I have and I found a discrepancy in the AMMCLIB name on C-C++ Build > Settings > Standard S32DS C Linker > Libraries > Libraries (-l). Refer to my project configuration in the attached image.

Re: MCSXTE2BK142_PMSM_FOC_1Sh build error

June6 — Wed, 03 Jul 2024 10:08:46 GMT

Thank you very much. It was solved.