Initialize the board

gieun — Thu, 30 May 2024 02:51:58 GMT

It looks like something went wrong during configuration on the s32k148 EVB.

Is there any way to initialize the board itself?

Re: Initialize the board

Robin_Shen — Thu, 30 May 2024 09:16:48 GMT

Have you modified FSEC[SEC] or run CSEc before?

Please check whether the onboard OpenSDA is working properly? By refer to https://community.nxp.com/t5/S32K/S32K148EVB-Dead-after-OpenSDA-Update-Need-help-to-recover/m-p/1205366

For Jummper and Power settings, please refer to:
https://www.nxp.com/document/guide/getting-started-with-the-s32k148-q176-evaluation-board:NGS-S32K148EVB

Best Regards,
Robin
-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Initialize the board in S32K

Initialize the board

Re: Initialize the board